17 MM Barbed Fittings
DIG’s heavy duty 1/2” (17 mm) Barbed Drip Fittings are used in the installation of DIG’s brown PC™ dripline and drip tubing with .570 to .600 ID. Used by home gardeners and professional alike, the brown fittings are available in a wide range of configurations and made of high-impact plastic with UV protection. Using a double barb, two pieces of dripline or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit.
Features
- Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
- Available in a variety of configurations
- Extra sharp barbed design for secure and easy installation of ½” and 17 mm drip tubing, emitter tubing and brown PC drip line without glue or clamps
- One-piece construction for added strength and durability for a long-term performance
- No special tools, clamps or glue are needed
- Used with DIG Brown PC or any brand of ½” dripline and polyethylene drip tubing with .570 to .600 ID
- Made of high impact, high strength, durable and UV resistant plastic for long-life operation even in harsh conditions
How to Order
| MODEL | DESCRIPTION | IMAGE |
|---|---|---|
| CB73 | 1/2 in. Barbed Coupling Connect two pieces of 1/2" poly tubing or dripline. |
|
| CB75 | 1/2 in. Barbed Tee Create a three-way layout of 1/2" poly tubing or dripline. |
|
| CB76 | 1/2 in. Barbed Elbow Creates a 90° layout of 1/2" poly tubing or dripline. |
|
| CB77 | 1/2 in. Barbed Male Adapter 1/2 in. MPT x 17mm barb |
|
Specifications
- Operating pressure: up to 50 PSI
- Color: brown
- Use with 1/2" drip tubing or drip line with .550 ID to .600 ID
- Material: Acetal
DIG’s brown 17 mm Barbed Drip Fittings are available in a range of configurations for 1/2″ drip line or drip tubing with .600 ID (17 mm); they provide a simple, low cost installation method. Using the double barbed fittings, drip line or drip tubing is pushed over the barbs for a very tight fit.
To use the barbed fittings with drip tubing or drip line, force the drip line or drip tubing over the barbed side of the connector, tee, or elbow.
