Extruded from premium polyethylene resin, DIG’s drip irrigation tubing and micro tubing are designed to meet every demand of a low volume drip irrigation system, from agricultural installations to backyard gardens. The drip tubing is used as the primary supply line in the installation of drip irrigation system, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. The drip tubing and micro tubing are manufactured with Dow 7510 linear low-density polyethylene resins and are resistant to cracking, heat, ultraviolet stress and chemicals.
DIG’s 1/4″ micro tubing comes in either, stiff polyethylene material or our new soft, MICRO-POLYFLEX material and is used primarily to extend drip emitters and micro sprinklers from the poly drip tubing to the plant; it can also be used as the main line in small drip irrigation systems. 1/8″ vinyl micro tubing is used with the Maverick™ 12-outlet drip manifold and our line of PC-CV single outlet drip emitters.