4-Outlet PC Drip Manifold

DIG’s 4 outlet PC drip manifold with a built-in anti-leak mechanism is used to water multiple plants from a single 1/2″ male threaded riser using ¼” micro tubing or dripline. Available in 4 flow rates, the unique design ensures uniform distribution at pressure range of 15 to 60 PSI, stopping water drainage after the system valve closes and pressure drops below 3.5 PSI. Use the 4 ports manifold to convert a 1/2″ sprinkler riser into a four-outlet drip irrigation system without altering the flow of the sprinkler zone. It connects to ¼” micro tubing or ¼” dripline to efficiently irrigate a wide variety of plants and trees.

Features

• Use for benches, boxes, large pots and for retrofit drip irrigation installation
• Attach to ¼” micro tubing or ¼” drip line with 0.150” ID to 0.170” ID
• ½” 90-degree FPT body for better protection of the outlet barbs
• Large water passages with rolling diaphragm allows debris to pass through without clogging
• Pressure-compensating for uniform water distribution from each outlet
• Built in anti-drain valve eliminates drainage after valve is closed
• Each barb outlet features a protective sleeve for longevity of the micro tubing connection
• The barb sleeve prevents blow off, allowing for easier removal of the micro tubing
• Built in easy to clean micro filter, provides protection from debris
• Easy to maintain and clean
• Available in 2 GPH (blue) per outlet, 6 GPH (black) per outlet, 10 GPH (red) per outlet and 20 GPH (green) per outlet
• Robust materials, UV protected to withstand extreme environmental conditions
• Install above grade or place below grade in a 6” emitter box
• Color coded body for easy flow rate identification
• The elbow can be sealed and closed with ¾” FHT cap