EXL Series V2Duo Foggers

Share:

EXL Series V2Duo Foggers

EXL Series V2Duo Foggers

Dual Fogger Head Assembly for Superior Cooling and Heat Stress Mitigation in Orchards and Vineyards.

The DIG EXL Series V2Duo is an innovative dual fogger head assembly specifically engineered for effectively cooling trees and vines during periods of intense and prolonged heat. Designed for above-canopy positioning, the V2Duo generates a dual stream of fine micro-sized droplets (50-100 μm) foggers that rapidly evaporate. This process significantly lowers the surrounding air temperature and cools foliage and fruit, providing crucial protection against heat stress. Operating within a pressure range of 35 to 80 PSI (2.4 to 5.5 bars), the V2Duo features an enhanced design for optimal canopy coverage, user convenience with easy maintenance, and a reliable press-fit compression mount.

Features

  • Optimal Cooling & Humidification: Creates ideal conditions by reducing temperature with higher humidity.
  • Blanket Coverage: Installed in an upright position and above the tree canopies.
  • Uniform Operation: Operates efficiently within a normal pressure range of 35 to 80 PSI with a nominal pressure at 50 PSI, ensuring consistent performance.
  • Ideal Droplet Size: Produces micro-sized droplets of 50 to 100 microns for rapid evaporation.
  • Vortex Technology: Incorporates a vortex mechanism for efficient atomization of water into micro-droplets.
  • Versatile Nozzles: Available with four flow rates, color-coded interchangeable nozzles for customized application.
  • Flexible Configurations: Offered with dependable high-pressure, anti-leak devices in one or four fogger assemblies.
  • Anti-Leak Protection: Prevents dripping at cycle start and at the end, safeguarding sensitive plants.
  • Reduced Maintenance & Costs: Lower operating pressure minimizes wear, leading to less maintenance and lower overall operational expenses.
  • Durable Construction: Manufactured from high-quality, UV-protected plastics.

Share:

How to Specify
MODEL DESCRIPTION IMAGE
50-501-25-V V2-Fogger Assembly
Fogger with V2 Outlet with Barb
25-033 V2-Adapter
Adapter .250" Barb to Female Press Fit
25-032 V2-Cap
Compression Cap for V2 Fogger Manifold
25-030 V2-B
V2 Outlet .250" with Barb
25-031 V2-PF
V2 Outlet .250" with Press Fit

Performance and Technical Data

  • Options: Two outlets
  • Flow rate: 1.5, 2 & 3 GPH (4, 6, 8, & 12 L/H)
  • Operating pressure: 35 to 80 PSI (2.4 to 5.5 BAR)
  • Operating pressure with anti-leak: 50 to 80 PSI (3.45 to 5.5 BAR)
  • Nominal flow rate at 50 PSI (3.5 BAR)
  • Pattern: 360°
  • Trajectory angle: approximately 70°
  • Recommended spacing: 3 to 4 feet apart (.9 to 1.2 m)
  • Installation mounting: inverted position in a close structure
  • Average droplet size is 50-100 microns
  • Filter requirements:
    • Flow up to 1.5 GPH (6 l/h), minimum of 200 mesh (80 microns)
    • 2 GPH (8 l/h), up to 155 mesh (100 micron)
  • Material: high-impact plastic
  • Note: Select the filtration method based on the concentration of the dirt particles in the water and the size of the fogger nozzle. If sand is found in the water, a sand separator is recommended before the main filter line.

Flow rate & diameter

Model 50-501-13 50-501-20 50-501-25 50-501-35
Nozzle color Black Green Brown Gray
Nozzle size (in) 0.013 0.020 0.025 0.035
Flow rate 1.0 1.5 2.0 3.0
Diameter (ft) 2.5 3.5 3.5 4.0
Misting angle 70° 70° 70° 80°
30 PSI 0.85 1.26 1.58 2.21
35 PSI 0.91 1.36 1.68 2.40
40 PSI 0.98 1.49 1.83 2.61
45 PSI 1.04 1.52 1.91 2.78
50 PSI 1.07 1.58 2.02 2.91
55 PSI 1.14 1.64 2.09 3.02
60 PSI 1.17 1.71 2.18 3.17
65 PSI 1.20 1.74 2.26 3.26
70 PSI 1.26 1.82 2.31 3.42

Performance at 6' (1.8 m) height

Nozzle color Black Green Brown Gray
Performance at 50 PSI (3.5 BAR), single head
Flow fates (GPH) 1.07 1.58 2.02 2.91
Cut Sheets