EXL Series Fogger

Our EXL Series fogger is ideal for misting and cooling applications. Our vortex design spins the water droplets into a fine mist resulting in lower ambient temperatures combined with a low precipitation rate for better control of the plants environment. The EXL series foggers are offered in .8, 1, 1.5, 2 and 3 GPH, with several installation choices.

Updated:07/16/10

Details Part Numbers Downloads

Features:

Incorporates a vortex design, which spins the water droplets into a fine mist
Modular, lightweight and easy to maintain, configure and install
Designed without a bridge to prevent dripping
Three part construction with o-ring for a tight seal
Available on 1/2" FNPT, 1/4" barb or 10/32 thread

Specifications:

Flow rate: .8-3 GPH (3-11.6 l/h)
Operating pressure: 35-80 PSI (2.4-5.6 BAR)
Inlet size: 1/4" (4 mm) barb or 10/32 thread
Filter requirement: 200 mesh

Materials:

Body & Cap: PBT
Nozzle: Acetal
O-ring: Buna-N

PERFORMANCE FLOW RATE VS. PRESSURE
	Nozzle Colors
	Purple	Black	Green	Brown	Gray
Nozzle size (inch)	0.010	0.013	0.020	0.025	0.035
Nom. flow rate	.8	1	1.5	2	3
Diameter (ft)	2.5	2.5	3.5	3.5	4.0
Misting angle	70°	70°	70°	70°	80°

Flow rates (GPH)
	Purple	Black	Green	Brown	Gray
35 PSI	0.76	0.85	1.36	1.68	2.40
40 PSI	0.80	0.91	1.49	1.83	2.61
45 PSI	0.84	0.98	1.52	1.91	2.78
50 PSI	0.85	1.04	1.58	2.02	2.90
55 PSI	0.87	1.07	1.64	2.09	3.02
60 PSI	0.90	1.14	1.71	2.18	3.17
65 PSI	0.91	1.17	1.74	2.26	3.26

Part Number	Color Code	Description
07-044	Violet	.8 GPH, on 1/4" barb
07-045	Black	1 GPH, on 1/4" barb
07-047	Violet	.8 GPH, on 10/32 thread
07-048	Black	1 GPH, on 10/32 thread
07-052	Brown	2 GPH, on 10/32 thread
07-054	Gray	3 GPH, on 10/32 thread
07-049	Violet	.8 GPH, on 1/4" barbed elbow
07-050	Black	1 GPH, on 1/4" barbed elbow
07-055	Green	1.5 GPH, on 1/4" barbed elbow
07-056	Brown	2 GPH, on 1/4" barbed elbow
07-057	Gray	3 GPH, on 1/4" barbed elbow
07-101	Green	1.5 GPH, on 1/2" FNPT
07-102	Brown	2 GPH, on 1/2" FNPT
07-103	Gray	3 GPH, on 1/2" FNPT

back