T.O.P 12-Outlet (TOP)

Share:

T.O.P 12-Outlet (TOP)

T.O.P 12-Outlet (TOP)

Designed to retrofit a 1/2″ sprinkler riser, DIG’s TOP 12-outlet drip manifold utilizes extremely accurate, pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Available with .6, 1, 2 and 3.3 GPH per outlet, the TOP can deliver water directly to up to 12 plants with less water evaporation and wind-drift than the overhead sprinkler heads it replaces. Using the TOP can save a significant amount of water by improving irrigation efficiency and lowering water runoff. For additional savings, check with your city for drip irrigation rebate program eligibility.

Features

  • Constructed with 12 built-in individually pressure compensating drip emitters
  • Self-flushing emitters allow passage of water and minimize clogging
  • Interchangeable drip emitters for variable flow rates in a single head
  • Color-coded drip emitters and barbs easily identify flow rate at each zone
  • Each drip emitter individually filtered (approx. 80 mesh)
  • Backup mini disk filter
  • Rugged materials to withstand the most adverse conditions
  • Install above grade or place below grade in a 6” emitter box
  • Inlet plugs provide the option to cap off up to eight drip emitters
  • TOP kits contain 100’ of 1/8” distribution tubing, accessories, stakes and 1/4” converter barbs allowing the use of 1/4” distribution tubing

Share:

How to Specify
MODEL DESCRIPTION
TOP – Twelve Outlet Manifold
TOP-000 Manifold only
TOP-005 0.6 GPH per outlet
TOP-010 1 GPH per outlet
TOP-020 2.2 GPH per outlet
TOP-030 3.3 GPH per outlet
TOP-100 KIT with 1 GPH per outlet
TOP-300 KIT with 3.3 GPH per outlet
Replacement drip emitter with o-ring
10-019 0.6 GPH per outlet
10-020 1 GPH per outlet
10-021 2.2 GPH per outlet
10-022 3.3 GPH per outlet
Related
10-016 Bug plug for 1/8 in. micro tubing
25-007 Converter elbow for 1/4 in. micro tubing

Specifications

  • Flow rates: .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3 and 12.5 L/H)
  • Pressure compensating range: 8-80 PSI (.5 - 5.6 BAR)
  • Recommended operating pressure: 15-50 PSI (1 - 3 BAR)
  • Temperature range: up to 122°F (50°C)
  • Inlet size: 1/2” FNPT
  • Use with 1/8” (.187" OD) or 1/4” (.150" - .160" ID) distribution tubing
  • Materials:
  • Body and cover: high-impact plastic
  • Filter: nylon
  • Diaphragm: silicon
  • Filter requirement: minimum of 120 mesh/ 130 micron,depending on water quality and concentration of dirt particles

Dimensions

  • Dimensions: 3” W x 2” H (7.6 cm W x 5 cm H)
** High water temperature in a micro irrigation lateral will influence the flow discharge.
Manuals
  • TOP-XXX

Cut Sheets
CAD Files
  • TOP12 Zone Pressure Compensating Drip Emitter With 1/2" FNPT
    • 1 Typical layout detail 3/4" remote control valve with 12-35 PSI adjustable pressure regulator and filter
    • 2 Typical layout detail TOP with 1/8" distribution tubing (.118-.125 ID) below grade installation
    • 3 Typical layout detail TOP, side outlet with 1/4" distribution tubing (.156-.150 ID) below grade installation
    • 4 Typical layout detail TOP, barb outlet with 1/4" distribution tubing (.156-.150 ID) below grade installation
    • 5 Typical layout detail TOP, top view and suggested number of outlet per plant
    • 6 Typical layout detail TOP top view
Specifications