Series 5000 Irrigation & Propagation Controllers

Share:

This model has been discontinued.

Series 5000 Irrigation & Propagation Controllers

Series 5000 Irrigation & Propagation Controllers

Features

  • Use for irrigation and propagation
  • Independent programming of start time, run time and day of the week for each valve
  • Four start times per program per valve
  • Automatic, semi-automatic and manual modes for each program
  • Four buttons with large (LCD)
  • 9-volt backup battery (not included)
  • Automatic short circuit detection isolates the shorted valve, continues irrigation cycle and gives visible alarm
  • Start time stacking prevents hydraulic overload
  • Can operate two valves at a time
  • Master valve remote pump start program
  • Rain or moisture sensor terminal hook up

Share:

How to Specify
MODEL DESCRIPTION
5006-I Six station indoor AC controller

Programming Features

  • 7-day programming schedule or intervals from 5 minutes to 30 days
  • Watering durations from 1 minute to 12 hours in 1 minute increments with four start times per day
  • Watering durations from 1 second to 1 hour in 1 second increments in propagation mode
  • Up to 60 start times per hour with every 1, 5, 15, 30 minutes and 1 hour for any limited period of the day with specific time setup every day in propagation mode
  • Monthly water budgeting from 10%-190% in 10% increments
  • Rain delay up to 30 days with a uto restart

Specifications

  • Input required: 120 VAC, 60Hz
  • Output: 24 VAC, 0.27A
  • Maximum output: 0.83A
  • Capacity: two 24 VAC solenoids per station
  • One terminal for sensor connection
  • Sensor override: allows sensor bypass regardless of sensor status
  • Materials:
    • Body and core: ABS

Dimensions

  • 4" W x 1.5" D x 6.25" H (10 cm W x 3.8 cm D x 16 cm H)
Manuals