NEW Heavy Duty 2" MPT Screen Filter


DIG’s heavy-duty 2″ screen filter features a robust design with a large filtration area, and it supports a high flow rate. It can handle long intervals between flushing and incorporates an easily removed filter cover. The filter can accept a wide range of color-coded screen or disc elements. It is available in inline or “T” angle versions and used for agriculture, turf, greenhouse and nursery applications


  • Special locking ring enables easy opening of the filters without the use of tools.
  • A wide range of filtration degrees for various applications
  • Large filter area and low friction loss allows long intervals between cleaning
  • Greater filtration capacity for effective protection of the irrigation system
  • All-purpose filter with a wide range of stainless-steel screens from 80 to 180 microns to suit a wide range of filtration requirements
  • Designed to reduce operating costs and deliver high quality filtrate in a minimum space
  • Made of superior strength material for excellent mechanical strength, and corrosion resistance for most common chemicals
  • Easy maintenance - the screen can be extracted from the filter for cleaning
  • Interchangeable screen with disc elements
  • Access point on the inlet and outlet side for pressure measurement test
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions


how to specify
Model Description
PN2TMPT-200 T with 200-mesh stainless-steel screen
PN2TMPT-155 T with 155-mesh stainless-steel screen
17-SSM-200 3/4” & 1”, 80- to 200-mesh stainless-steel screens
17-SSM-155 3/4” & 1”, 80- to 155-mesh disc screens
PN2MPT-200 2″ in-line with 200-mesh stainless-steel screen
PN2MPT-155 2″ in-line with 155-mesh stainless-steel screen


Primary, secondary or backup filtration for the protection of irrigation systems against clogging in agriculture, municipalities, greenhouses, nurseries, landscapes and turf.


  • Flow rates: up to 110 GPM (25 m3/h)
  • Screen filtration area: 147 in2 (950 m2)
  • Operating pressure: up to 150 PSI (10 BAR)
  • Temperature range: up to 140°F (60°C)
  • Stainless steel screens from 120 to 200 mesh
  • Horizontal, vertical inlet and vertical outlet
  • Available with a manual drain valve located at the bottom of the filter and with two pressure testing ports
  • Inlet and outlet size: 2" MNPT (50 mm) with 3/4" NPT cap
  • Filter weight: 10 lb (4.6 kg)
    • Filter dimensions:
    • Thread to thread: 11" (28 cm)
    • Height of thread to bottom: 17.5" (45 cm)
    • T-filter: Height of thread to bottom: 22.8" (58 cm)
  • Filter Materials:
    • Housing and cover: PP and GF
    • Locking ring: PA and GF
    • O-ring: EPDM
    • Screen spine: PP and stainless steel
    • Pressure testing port: polypropylene
    • Pressure testing seals: natural rubber

heavy duty filter head loss chart


Cut Sheets

  • Thumb_heavy-duty-filter-2

    Heavy Duty 2" Screen Filter Cut Sheet

Corporate Information

Where To Buy
Contact Us

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146

© copyright 2018 DIG Corporation water matters™ | All rights reserved