Professional

Fogger on 1/2" base

DIG's EXL Series Foggers with a 1/2” base operate at a pressure range of 30 to 70 PSI to produce micro-sized droplets in a small diameter area when mounted above the plant. Higher incoming pressure results in a smaller and finer droplet size. The fogger’s vortex design spins the incoming water into a very fine mist which is useful where overhead cooling or misting is desired, or for plants that require constant moisture. The foggers are ideal for misting and humidifying hanging baskets and planters, as well as hanging above plants for a cooling effect.

Features

  • Supports optimal cooling or humidifying conditions by reducing temperature and increasing humidity
  • Incorporates a vortex design that swirls water droplets into a fine mist
  • Operates in a normal pressure range of 30 to 80 PSI with high uniformity
  • Produces a droplet size of 50 to 100 microns (100 m at 50 PSI)
  • Available in four color-coded Interchangeable nozzles
  • Modular, lightweight and easy to maintain, configure and install
  • Designed without a bridge to prevent dripping
  • Three-part construction with O-ring for a tight seal
  • Available on 1/2" FNPT, 1/4" barb or 10/32" thread
  • Manufactured from superior durable plastics with UV protection for extended life operation

technical


Fogger on 1/2" base
how to specify
Model Description
EXL Series Fogger on 1/2 in. FNPT
07-102 2.0 GPH
07-103 3.0 GPH
07-101 1.5 GPH

Specifications

  • Flow rate: .8 to 3 GPH (3 to 11.3 L/H)
  • Operating pressure: 35 to 80 PSI (2.4 to 5.5 BAR)
  • Inlet size: 1/4" (4 mm) barb or 10/32" thread
  • Materials:
    • Body and cover: Polyester
    • Nozzels: acetal
    • O-ring: Buna-N
  • Filter requirement: minimum of 200 mesh

Dimensions

  • 1.3" W x 2.3" H (33 mm W x 58 mm H)
Flow rate and diameter
Pressure Misting Flow rate diameter
PSI Mister base GPH 360°
20 brown 0.035 1.96 1.2'
25 brown 0.035 2.16 1.2'
30 brown 0.035 2.21 1.4'
35 brown 0.035 2.40 1.3'
40 brown 0.035 2.61 2.4'
45 brown 0.035 2.78 1.5'
50 brown 0.035 2.91 1.5'
55 brown 0.035 3.02 1.6'
60 brown 0.035 3.17 1.6'
Maximum number of Fogger/Misters on 1/2" drip tubing with .600" ID
Fogger/Mister spacing 2' 3' 4' 5'
Flow rate @ 30 PSI 2.21 2.21 2.21 2.21
Maximum length 142' 186' 224' 255'
Flow rate in GPM 2.62 2.28 2.06 1.88
Flow rate in GPH 156.9 137 123.8 112.7
# of fogger/misters 71 62 56 51
Head loss in PSI 4.9 5.0 5.0 4.8
Velocity (f/s) 2.97 2.59 2.34 2.13
Total head loss at the Fogger/Mister head 4.9 5.0 5.0 4.8



DIG_logo_white_web
Corporate Information

Where To Buy
About
Contact Us
Careers

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2020 DIG Corporation water matters™ | All rights reserved | Privacy Policy | Terms of Use