6-Outlet Adjustable Drip Manifold

Share:

6-Outlet Adjustable Drip Manifold

6-Outlet Adjustable Drip Manifold

Converts an existing 1/2″ sprinkler riser to a 6-outlet, adjustable high-flow drip system with a flow rate 0 to 20 GPH per zone. The 6-outlet drip manifold operates at any pressure between 15 to 50 PSI. It may be used with 1/4″ micro tubing, 1/4″ dripline or with individual drippers.

Features

  • Swivel barbed outlets allow installation flexibility and protection of flow control
  • Made of rugged materials to withstand adverse conditions
  • Can be installed above or below grade in a 6″ (15 cm) emitter box
  • Use with 1/4″ (.150″ -.170″ ID (4 mm ID) distribution tubing or with 1/4″ (4 mm) dripline

Share:

How to Specify
MODEL DESCRIPTION
Six Outlet Adjustable Drip Manifold
06-620 Barb outlet, 1/2 in. FPT, adjustable head, 0-20 GPH per outlet

Specifications

  • Flow rate is adjustable between 0-20 GPH (0-75 L/H) per each outlet
  • Operating pressure: 15-50 PSI (3.5 BAR)
  • Temperature range: up to 122°F (50°C)
  • Inlet size: female pipe thread (FNPT)
  • Outlets size: 1/4" barbed mini valve
  • Accepts 1/4” distribution tubing with .150" to .170" ID and 1/4" drip line
  • Filter requirement: minimum of 40 mesh
  • Materials:
    • Body and cover: high-impact plastic
    • Barbed valve: high-impact plastic
    • Diaphragm: EPDM

Dimensions

  • 2.25" W x 1.5" H (57 mm W x 38 mm H)
** High water temperature in a micro irrigation lateral will influence the flow discharge.
Videos & Articles
  • DIG drip irrigation system installation - connecting a 6 outlet mainfold