4-Outlet PC Drip Head Manifolds

Share:

4-Outlet PC Drip Head Manifolds

4-Outlet PC Drip Head Manifolds

DIG’s 4-Outlet PC Drip Head Manifold is an emission device used to retrofit a 1/2″ sprinkler riser into a four-outlet drip irrigation system without altering the flow of the sprinkler system zone. The 4-Outlet PC Drip Head Manifold is available in four color-coded models and can operate at a pressure range of 10-50 PSI with an even flow per each outlet. It allows installation flexibility when incorporated into a new system or as a part of an existing sprinkler system zone. The barbed outlets are used with 1/4″ distribution tubing or 1/4″ drip line to deliver water to individual plants or groups of plants.

Features

  • Pressure compensating feature supports consistent flow at operating pressure range from 10 to 50 PSI, providing equal flow from each outlet regardless of pressure fluctuations
  • Color coded base for easy flow rate identification
  • Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil
  • Eliminates wet walls and discoloration and staining of fences and windows
  • Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
  • No special tools or glue are needed
  • DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
  • Built with a backup screen filter
  • Barbed outlets allow installation flexibility
  • Can be installed above grade or placed below grade in a 6″ emitter box
  • Use with any 1/4″ distribution tubing or 1/4″ dripline
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse

Share:

How to Specify
MODEL DESCRIPTION COLOR
Four Outlet Drip Manifolds
06-042 2 GPH
Blue
06-043 6 GPH
Black
06-044 12 GPH
Red
06-045 20 GPH
Green

Specifications

  • Flow rates: 2, 6, 12 and 20 GPH (8, 23, 45 and 76 L/H)**
  • Operating pressure: 10-50 PSI (.7-3.5 BAR)
  • Temperature range: up to 122°F (50°C)
  • Inlet size: 1/2" FNPT
  • Outlet size: 1/4" (4 mm) barb
  • Filter requirement: minimum of 120 mesh
  • Materials:
    • Body: ABS
    • Diaphragm: EPDM
  • Dimensions: 1.3" W x 2.3" H (33 mm W x 58 mm H)
** High water temperature in a micro irrigation lateral will influence the flow discharge.