The 13″ Universal Ray Spike and the Adjustable Flow Spike Assembly with an 8″ Poly Riser are used to extend, stabilize and hold misters and micro sprayers above the plant canopy, providing a simple solution to a spray-height layout within the plant growth area.
MODEL | DESCRIPTION | IMAGE |
---|---|---|
R63 | Universal Spike Assembly 13" spike assembly with 24" of 1/4" micro tubing and barb connector, used to raise any micro sprayer above the ground. |
|
R66 | Ray Spike 13" spike used with 1/4" micro tubing and a barb to raise any micro sprayer above the ground. |
|
R68 | Adjustable Flow Spike Assembly 8" spike with needle valve and 8" poly riser used to raise any spray jet or fogger above the ground. With ability to adjust the flow rates. |
|
The 13″ Universal Ray Spike and Ray Spike assembly with micro tubing and a barb are used to extend spray jets, misters, micro sprayers or foggers with 10/32 thread above the plant area using 1/4″ micro tubing. A length of 1/4″ micro tubing is attached or can be attached into the ray spike and a micro sprinkler, mister or spray jet can be inserted at the top of the micro tubing. A 1/4″ barb can be inserted into the other end of the micro tubing and then connected into the drip tubing.
The adjustable-flow spike assembly is used to raise micro sprayers, spray jets, misters or foggers with 10/32 thread above the plant area, and also adjusts the incoming flow. To adjust flow and coverage, turn the knob mounted on the stake clockwise to increase the flow or counter clockwise to decrease the flow and the coverage.
A length of 1/4″ micro tubing is attached or can be attached into the spike assembly’s barbed inlet and a micro sprinkler, mister or spray jet can be inserted at the top of the PE tubing. An additional 1/4″ barb is inserted into the other end of the micro tubing and then connected into the drip tubing.