DIG’s drip irrigation hole punches are designed to easily punch a clean hole in any size of drip tubing for the insertion of drip emitters, micro sprinklers and 1/4″ barbed fittings. The punches are designed to remove the residual debris formed as the hole is created in the drip tubing, protecting the drip emitters and micro sprinklers from plastic debris that can, over time, plug the system. The small punch is inexpensive and the deluxe gun punch is heavy duty with an optional replacement of the stainless steel pin.
Punch holes in 1/2" poly tubing when connecting 1/4" micro tubing or drippers to the main line.
|Pro Hole Punch
Easily punch holes in 1/2" poly tubing when connecting 1/4" micro tubing or drippers to the main line.
|Multipurpose Drip Irrigation Punch Tool
Punch holes in 1/2" poly tubing. Holds 1/4" fittings for attaching 1/4 tubing. Pulls fittings and broken emitters from dripline.
The Palm Hole Punch and the Pro Punch are used to punch holes in any size of drip tubing for the insertion of drip emitters, micro sprinklers, 1/4″ barbs and 10/32 threaded barbs.
When using this punch, make sure to punch the hole in the center of the drip tubing and use a paper clip or pin from time to time to remove the debris stuck inside.