PE Riser
The 1/4″ Semi-Rigid Extension Poly Riser with a 1/4″ barb is used in the installation of our micro sprayers, misters or foggers with 10/32 thread. The poly riser can be used to extend the micro sprayers, misters or foggers above the ground and above the plant canopy, providing a simple solution to a spray-height layout within the plant growth area.
Features
- Used to extend and hold micro sprayers, misters or foggers above ground
- Available pre-assembled with a semi-rigid PE riser and barb
- Height of the sprayers can be adjusted as needed for the plants’ growth
- Constructed of UV-resistant, high-impact plastic
How to Order
| MODEL | DESCRIPTION | IMAGE |
|---|---|---|
| P34B | Flexible Risers with Barbs (pack of 5) Raises a jet sprayer or fogger 6" above the ground. |
|
| P12B | 12 inch poly riser with self-piercing threaded barb (Bag of 5) |
|
Specifications
- Pre-assembled semi-rigid poly riser dimensions: .160 ID x .300 OD
- Poly riser height: 6"
- Material:
- UV-resistant, high-impact plastic
- PE riser: poly
About
The 1/4″ Semi-Rigid Extension Poly Riser with a 1/4″ Barb (model P34B, pack of 5) is used to raise spray jets, misters, micro sprayers or foggers with 10/32 thread above the plant area
- To install the poly riser, first thread the micro jets, misters, micro sprayers or foggers with 10/32 thread into the poly-riser end.
- Punch a hole into the drip tubing and insert the barbed side of the poly riser into the drip tubing.
