Foggers
DIG Ocean Breeze Foggers deliver a pleasant mist that gently cools the sounding air. Operating at house pressure, the foggers produce micro-sized droplets that lower the surrounding air temperature with a slight increase in humidity. In high temperatures, the small sized water droplets put out by the foggers turn to vapor and evaporate, cooling the surrounding air. Ocean Breeze Foggers are available in .8 and 1 GPH @ 50 PSI and operate at a pressure range of 30 to 80 PSI. Ocean Breeze Foggers have a 1/4” barb or 10-32 thread to allow for a quick and easy connection to 1/4” or 1/2” pipe.
Features
- Incorporates a vortex mechanism, spinning the incoming water into fine mist with micro-sized droplets
- The higher the pressure the smaller the droplet and the more the quickly the mist evaporates
- Can be used anytime to lower temperature and add humidity
- Can be used for overhead cooling and humidifying, indoors or outdoors
- Trouble-free operation with no moving parts
- Low flow with small droplets in a fine mist with a 360° pattern and approximately 70° trajectory
- Color-coded nozzles are easy to open, clean and replace
- Three-part construction with O-ring for a tight seal
- Available with 1/4” barb or 10-32 thread
- Constructed of UV-resistant, durable plastic material
How to Order
| MODEL | DESCRIPTION |
|---|---|
| Mist Nozzle on 10/32” Thread | |
| OB05 | 0.75 GPH Mist Nozzle on 10/32” Thread (pack of 5) Purple Use with flexible misting line |
| OB06 | 1.00 GPH Mist Nozzle on 10/32” Thread (pack of 5) Blue Use with flexible misting line |
| Mist Nozzle on Barb | |
| OB02 | 0.75 GPH Mist Nozzle on Barb (pack of 5) Purple Use with flexible misting line |
| OB03 | 1.00 GPH Mist Nozzle on Barb (pack of 5) Blue Use with flexible misting line |
Specifications
- Operating pressure range: 30 to 80 PSI
- Flow rate:
- Purple .85 GPH @ 50 PSI
- Blue 1 GPH @ 50 PSI
- Pattern: 360°
- Body color: beige
- Trajectory angle: approximately 70°
- Connection: 1/4" barb or 10/32 thread
- Average droplet size: 50 microns
- Filter requirement: minimum of 150 mesh
- Recommended spacing: 3' to 4' apart
- Material:
- Body and cover: Polyester
- Nozzels: Acetal
- O-ring: Buna-N
Installation suggestions
Space 3 – 4 ft. apart at a 120° angle to the ground on flexible Misting Line. Working pressure 40-80 PSI.
For use with 1/4 in. Misting Line: Cut Misting Line in the place where you want to position your Misting Nozzle, and insert the straight portion of the 1/4 in. line tee. Push a small piece (1 to 2 in.) of the 1/4 in. Misting Line into the bottom of the Line Tee and push the barbed end of the Misting Nozzle in to secure.
For use with 3/8 in. Misting Line: Punch a hole in the Line with Model OB20 Punch and insert the barbed end of the Mister. Mister should be installed at a 120° angle to the ground, 3 – 4 ft. apart.
