DIG’s premium quality 1/2″ (.600 ID X .700 OD) Polyethylene drip tubing is available in lengths of 50′, 100′, 200′, 500′ and 1000′. The polyethylene drip tubing, commonly referred to as drip irrigation tubing, blank tubing, distribution tubing. PE tubing or drip hose, is used as the primary drip irrigation installation supply line, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. DIG’s durable drip irrigation tubing is made with low-density polyethylene resin material with a minimum of 2%+ Carbon Black for extra resistance to the damaging effects of ultraviolet rays. DIG poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength to meet every demand of drip irrigation system installations above or below grade.
|B35||50 ft. 1/2 in. Poly Tubing ||
|B36||100 ft. 1/2 in. Poly Tubing ||
|B39||200 ft. 1/2 in. Poly Tubing ||
|B37||500 ft. 1/2 in. Poly Tubing ||
|B43||1,000 ft. 1/2 in. Poly Tubing |
|B30-2||2 ft. 1/2 in. Poly Tubing – .700 OD |
DIG .700 OD poly drip tubing is generally is used as the main lateral or the supply line to deliver water to the plant area in a drip irrigation system installation in commercial, residential or agricultural applications. The poly drip tubing may be installed above the ground and covered with mulch to blend with the landscape, or below grade.
DIG .700 OD poly drip tubing is available in 100′, 200’, 500’ and 1000′ and it is manufactured with Dow 7510 low density polyethylene resin and includes 2%+ Carbon Black for extra resistance to ultraviolet rays. DIG’s premium poly drip tubing dimension is .600 ID x .700 OD, a universally accepted size used in drip irrigation installations. The poly drip irrigation tubing size can vary by manufacturer, with some having larger or smaller ID and OD, and each size may display different flow characteristics.