Brown drip tubing, commonly referred to as poly tubing, blank tubing, or drip hose, is used as the primary supply line of a drip irrigation system into which drip line, micro line or drip emitters are connected to deliver water to the plant area. Made with premium quality polyethylene resins, DIG’s 0.700″ OD brown drip irrigation blank poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations. Brown poly tubing has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life. It is available in coils of 100′ and 500′.
Features
- Produced with Dow’s 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
- Color: Brown
- Use with DIG’s black compression fittings, 17 mm barbed fittings and Nut Lock™ fittings
- Dimensions: 100 ft. with .600 ID x .700 OD
- Bending radius: 1 foot
- Maximum operating pressure: 60 psi
- Can be installed above or below ground
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
- Made in Vista, CA, USA