LEMA 1600HE Solenoid
DIG LEMA 1600HE is an enclosed, zero maintenance, hight efficiency watertight, 2-way magnetic solenoid actuator that requires a minimal power for use with the LEIT series controllers. The LEMA 1600HE can replace conventional solenoids on most valves, enabling the LEIT irrigation controllers to operate most brand name valves using DC power at a long distance of up to 4500 feet with 14 AWG wire
Actuator Features
 |
| • | Adaptable to a wide range of valves using our valve adapters |
|
| • | Sealed plastic over molding technique for waterproof construction |
|
| • | Encapsulated plunger and spring for reliable operation |
|
| • | Internal bleed, manual override for manual ON/OFF |
|
| • | Surge protected and built in self diagnostic capability for short wire or open wire failure |
|
| • | Uses 18 gauge two color coded 18" wires |
|
| Electrical Specifications |
| • | 2-way magnetic latching, normally closed, bi-directional pulse |
|
| • | Coil operating data:
- Coil resistance 5Ω at voltage range of 6-9 VDC with pulse 10-20 mS duration
- + Pulse red - white, latched to open
- - Pulse red + white, released to close
|
|
| Maximum Wire Runs |
| wire gauge |
12 AWG |
14 AWG |
| maximum wire runs |
7,500 ft (2272 m) |
4,500 ft (1365 m) |
|
