Relay Interface Kit
The RKIT Relay interface provides a simple, reliable, waterproof way to switch a relay of an AC or DC circuit. The LEIT series controllers can be used to turn a pump on and off. To enable the LEIT controller to use the RKIT to turn on a pump, the RKIT must be connected to the station connector strip unit labeled MV/P. If any other AC or DC equipment is needed for relay switching, it can be connected to any other available station connector strip.
Specifications
 |
| • | RKIT 8110S and RKIT 8810E can be used to switch into a circuit between 24V AC/DC and 230 V AC/DC |
|
| • | Length: approx 1.9" (4.7 cm); Diameter: approx 1.1" (2.7 cm) |
|
| • | Weight: approx. 8 oz (220 G) |
|
Relay Interface Kit Features
|
| • | Waterproof construction |
|
| • | Easy to install |
Choosing the Correct RKIT Model
|
| • | The RKIT 8110S is used for installation with the LEIT 4000, LEIT X and for the standard stations on LEIT 4000E series control units. |
|
| • | The RKIT 8110E is used for expansion stations on the LEIT 4000E series control units. |
|
