Spikes

The 13" Universal Ray Spike and the Adjustable Flow Stake Assembly with 8" Poly Riser are used to extend, stabilize, and can hold misters, micro sprayers, or micro sprayers with 10/32 thread above the plant canopy, providing a simple solution to a spray height layout within the plant growth area.

Features

  • Heavy duty, rugged spikes and stakes designed for a wide range of layouts and applications
  • Use to extend and hold micro sprayers or micro sprinklers above ground
  • Available pre-assembled with rigid PE riser or with flexible vinyl micro tubing
  • Height of the sprayers can be adjusted as needed to the plants’ growth
  • Securely hold the micro sprayers with ¼ in micro tubing above ground
  • Flow rate on the adjustable stake can be set to Off
  • Constructed of UV-resistant high impact plastic
  • Can be used with poly or flexible vinyl micro tubing for optimum versatility

technical


Spikes
how to order
Model Description Image
R63 Universal Spike Assembly
13" spike assembly with 24" of 1/4" micro tubing and barb connector, used to raise any micro sprayer above the ground.
R63
R66 Ray Spike
13" spike used with 1/4" micro tubing and a barb to raise any micro sprayer above the ground.
R66
R68 Adjustable Flow Spike Assembly
8" spike with needle valve and 8" poly riser used to raise any spray jet or fogger above the ground. With ability to adjust the flow rates.
R68

Product specifications

  • Ray Spike fits all sizes of micro tubing with .270 to .310 in. OD
  • Ray Spike height: 13 in
  • Adjustable stake with PE riser height: 16 in:
  • Material:
    • UV-resistant high impact plastic
    • PE riser: poly
    • Micro tubing: vinyl



how to use


Spikes

About

The 13" Universal Ray Spike and the Ray Spike assembly with micro tubing and barb are used to extend spray jets, misters, micro sprayers, or foggers with 10/32 thread above the plant area using 1/4" micro tubing.
A length of 1/4" micro tubing is attached or can be attached into the Ray Spike and a micro sprinkler, mister, or spray jet can be inserted at the top of the micro tubing. A 1/4" barb can be inserted into the other end of the micro tubing and then connected into the drip tubing.

The Adjustable Flow Spike Assembly with 8 in. Poly Riser is used to raise micro sprayers, spray jets, misters, or foggers with 10/32 thread above the plant area, and also adjusts the incoming flow. To adjust flow and coverage, turn the knob mounted on the stake clockwise to increase the flow or counter clockwise to decrease the flow and the coverage.

A length of ¼ in. micro tubing is attached or can be attached into the Adjustable Flow Spike Assembly barb inlet and a micro sprinkler, mister, or spray jet can be inserted at the top of the PE tubing. Additional ¼ in. barb is inserted into the other end of the micro tubing and then connected into the drip tubing.


Please let us know if these instructions were helpful to you by liking it or providing feedback below.




DIG-Logo-Tag
Homeowner Resources

Manuals
Videos & Articles
Catalogs

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2013 DIG Corporation water matters™ | All rights reserved