PE Risers

The ¼ in. Semi-Rigid Extension Poly Riser with 1/4 in. Barb is used in the installation of our micro sprayers, misters, or foggers with 10/32 in. thread. The poly riser can be used to extend the micro sprayers, misters, or foggers above the ground, and above the plant canopy, providing a simple solution to a spray height layout within the plant growth area.

Features

  • Use to extend and hold micro sprayers, misters, or foggers above ground
  • Available pre-assembled with semi-rigid PE riser and barb
  • Height of the sprayers can be adjusted as needed to the plants’ growth
  • Constructed of UV-resistant high impact plastic

technical


PE Risers
how to order
Model Description Image
P34B Flexible Risers with Barbs (pack of 5)
Raises a jet sprayer or fogger 6" above the ground.
P34B

Product specifications

  • Pre-assembled Semi-Rigid Poly Risers with Barb dimensions: .160 ID x .300 OD
  • Poly riser height: 6 inch
  • Material:
    • UV-resistant high impact plastic
    • PE riser: poly



how to use


PE Risers

About

The ¼ in. Semi-Rigid Extension Poly Riser with 1/4 in. Barb model P34B (pack of 5) is used to raise spray jets, misters, micro sprayers, or foggers with 10/32 thread above the plant area
1. To install the Semi-Rigid Extension Poly Riser with 1/4 in. Barb, first thread the micro jets, misters, micro sprayers, or foggers with 10/32 thread into the poly riser end.
2. Punch a hole into the drip tubing and insert the barbed side of the poly riser into the drip tubing.


Please let us know if these instructions were helpful to you by liking it or providing feedback below.




DIG-Logo-Tag
Homeowner Resources

Manuals
Videos & Articles
Catalogs

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2013 DIG Corporation water matters™ | All rights reserved