PVC Inserts

DIG’s C31B (pack of 2) ½ in. compression PVC Insert is glued to a ½ in. slip PVC coupling or tee and is used to connect ½ in. drip tubing with 700 OD to ½ in. PVC pipe.

Features

  • Fits ½ in. polyethylene tubing with .700 OD to .704 OD
  • Glues into the slip side of any ½ in. PVC fitting
  • Use with any PVC glue
  • Made with high impact UV resistant plastic

technical


how to order
Model Description Image
C31B PVC inserts
Glue into any 1/2" PVC slip side to adapt it to 1/2" poly tubing (.690 - .704 OD).
C31B

Product Specifications

  • Operating pressure: Up to 60 PSI
  • Recommended operating pressure: 10 to 30 PSI
  • Size: For .700 OD to .704 OD drip tubing and drip line
  • Color: Black
  • Materials: High impact plastic



how to use


About

The ½ in. compression PVC Insert is used in the installation of a drip irrigation system to connect ½ in. drip tubing with .700 OD to .704 OD to a PVC pipe.

Installation

To connect the drip tubing into the compression fitting, first, glue the insert into a ½ in. PVC slip coupling, elbow, or tee and let it dry for an hour. Insert the ½ in. drip tubing end with .700 to .704 OD into the compression side of the insert, pushing and wiggling the drip tubing back and forth into the fitting. The 1/2" compression fitting side uses a simple wrist action and the drip tubing is "walked" into the fittings for a very tight fit, ensuring watertight connection.


Please let us know if these instructions were helpful to you by liking it or providing feedback below.




DIG-Logo-Tag
Homeowner Resources

Manuals
Videos & Articles
Catalogs

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2013 DIG Corporation water matters™ | All rights reserved