Punches

DIG’s drip irrigation hole punches are designed to easily punch a clean hole in any size of drip tubing for the insertion of drip emitters, micro sprinklers, and ¼ in. barbed fittings. DIG’s punches are designed to remove the residual debris formed as the hole is created in the drip tubing, protecting the drip emitters and micro sprinklers from plastic debris that over time can plug the system. The small punch is inexpensive and the deluxe gun punch is heavy duty with optional replacement of the stainless steel pin.

Features

  • Use to puncture holes when installing drip emitters and micro sprinklers in polyethylene tubing
  • Designed to remove the residual debris formed as the hole is created in the drip tubing
  • Easy grip handle constructed of durable plastic and non-corrosive materials
  • The deluxe pro punch stainless steel pins can be replaced
  • Constructed of UV resistant, high impact plastic
  • The basic punch is inexpensive and used only for punching single holes into drip tubing.
  • The deluxe professional punch can be used for punching a large number of holes into drip tubing

technical


Punches
how to order
Model Description Image
D44 Punch
Punch holes in 1/2" poly tubing when connecting 1/4" micro tubing or drippers to the main line.
D44
16-035R Deluxe Punch
Easily punch holes in 1/2" poly tubing when connecting 1/4" micro tubing or drippers to the main line.
16-035R

Product specifications

  • Pin size for small punch: ¼ in with .170 OD (4 mm)
  • Pin size for professional punch: .110 OD (3 mm)
  • Material:
    • Handle and housing: high impact plastic
    • Pin: stainless steel



how to use


Punches

About

The Palm Hole Punch and the Pro Punch are used to punch holes in any size of drip tubing for the insertion of drip emitters, micro sprinklers, 1/4" barbs, and 10/32 threaded barbs, creating the right sized hole in the drip tubing.
When using this punch, make sure to punch the hole in the center of the drip tubing and use a paper clip or pin from time to time to remove the debris stuck inside.


Please let us know if these instructions were helpful to you by liking it or providing feedback below.




DIG-Logo-Tag
Homeowner Resources

Manuals
Videos & Articles
Catalogs

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2013 DIG Corporation water matters™ | All rights reserved