Hose End Closures

The Figure”8” Hose End is used in the layout and installation of a drip irrigation system to close the end of the drip tubing or drip line and allow easy flushing of the system.

Features

  • Easy to install, secure, no-leak end connection of a drip tubing
  • Allows for easy flushing of a drip irrigation layout
  • Effective way to close the end of a drip tubing or drip line
  • Inexpensive, and easy to use
  • UV resistant, high impact plastic

technical


how to order
Model Description Image
F68B Figure in.8 in. Hose Ends
Closes the end of 1/2" poly tubing (.690 -.704 OD).
F68B

Product specifications

  • Size: 1/2" in.
  • Material: Polypropylene



how to use


About:

The Figure”8” Hose End is a simple and inexpensive part used for closing and flushing the end of a drip tubing or drip line.

Installation

To close the end of ½ in. drip tubing: Insert the end of the drip tubing into one side of the Figure”8” Hose End. To close the end of the drip tubing or drip line, bend the drip tubing and insert the drip tubing end into the other side of the figure "8".

To flush a drip lateral: While the drip lateral is under pressure, pull the end of the drip tubing from the figure "8" hose end and flush the lateral. To close the end of the drip lateral, bend the drip tubing and insert the drip tubing end into the other side of the figure "8".


Please let us know if these instructions were helpful to you by liking it or providing feedback below.




DIG-Logo-Tag
Homeowner Resources

Manuals
Videos & Articles
Catalogs

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2013 DIG Corporation water matters™ | All rights reserved