ECO1™ MVA Single Station Ambient Light Powered Irrigation Controller with 3/4" Actuator

The ECO 1™ MVA is an advanced single station ambient light (solar) powered, smart irrigation controller mounted on a ¾” actuator and is used to automate a ¾” or 1” manual anti-siphon valve. Power is derived via a patented time-tested, internal photovoltaic module and microelectronic energy management system that is fueled by ambient light (solar). This provides power to the controller through the day anytime, anywhere and in any weather.

The ECO 1™ ambient light (solar) powered, smart irrigation controller on ¾” actuator uses features that include five start times per day, durations of up to 5 hours and 59 minutes, Manual Run, Monthly Budget, Rain Off with restart in up to 99 days, System Off and Irrigation Off for any month of the year. The controller also has additional features that include daily watering restriction that can be used on any watering event that requires curbing by cites and municipalities.

Features

  • Environmentally friendly with no backup battery or AC power necessary; uses clean, renewable solar power
  • Use for drip irrigation or sprinkler systems
  • Seven buttons with integrated LCD
  • Programmable run times from 1 minute to 5 hours and 59 minutes in 1 minute increments
  • more features
  • No backup battery or AC power necessary - uses clean solar energy
  • Watering flexibility with selection of watering frequencies and a number of start times
  • Simple, icon based programming
  • Daily and weekly programming that complies with city and municipal watering restrictions.
  • Manual On/Off button opens the valve and shows the time left to run.
  • Semi-automatic or manual operation
  • Power level meter indicates the approximate charge (energy available).
  • On activation, the controller display indicates program is running and if any programming feature is active.
  • User reset option allows erasing of all programs to default settings except time, day and date.
  • Program On/Off button: allows the user to turn off the controller/ valve and reactivate it as desired.
  • Energy conservation; after fifteen minutes the controller screen is turned off automatically.
  • Rugged, reinforced self-cleaning diaphragm provides reliable operation even with contaminated water.
  • High flow with low pressure loss
  • Connected into pipe thread configuration
  • Latching solenoid with encapsulated plunger and spring for reliable operation
  • Wire ready for a rain sensor
  • Non-volatile memory
  • Utilizes RoHS compliant components
  • Completely waterproof (IP68)
  • 3 year warranty

technical


ECO1™ MVA Single Station Ambient Light Powered Irrigation Controller with 3/4" Actuator
how to order
Model Description
ECO1 MVA Single Station Ambient Powered Controller with 3/4 in. Actuator

Products specifications

  • Operating pressure: 20 to 125 PSI
    • Recommended operating pressure: 20 to 80 PSI
  • Water Temperature range: 38-130°F (3-54°C)
  • Non corrosive materials
  • Power source: Ambient Light (PVM)
  • Controller input: 3,000 -100,000+ LUX
  • Solenoid: 7-12 VDC, two-way latching, normally closed using two wires
  • Assembled with ¾” adapter with seat-washer, also includes in the package a 1” adapter with washer

Programming options

  • Watering duration: 1 minute up to 5 hours and 59 minutes set in one minute increments
  • Watering frequency: weekly or cyclical schedule with odd days, even days or intervals from one to thirty (1- 30) days utilizing 365 day yearly calendar with leap year.
    • In weekly schedule the controller can be programmed to operate on any day of the week such as Monday, Wednesday and Friday.
    • In cyclical schedule the controller can be programmed to operate on odd days, even days or on any day such as every three days.
  • Start time: Four start times per day in weekly or cyclical provides added flexibility for any type of watering application including sandy or clay soil.
  • 20 Preset Historical ET programs with 10 climate zones, 10 for drip irrigation and 10 for spray systems.
  • Monthly seasonal adjustment budget (0 to 200%) in 5% increments without modifying the controller's program duration; also can be used to fine-tune the preset ET program for each month.
  • Rain off/delay option with automatic restart of up to 99 days

The ECO1™ MVA’s main features include twenty preset programs of historical Evapotranspiration (ET) for spray heads and drip irrigation with an editing feature that can be used as part of the controller programming. Combining one of the historical Evapotranspiration preset programs and a rain sensor can help seasonally adjust or prevent unnecessary watering and save water. After installation, no further visits to the controller are required.




manuals


Manuals


videos & articles


Videos

  • default

    ECO1 Installation - MVA

  • default

    Manual Actuator Conversion



how to use


ECO1™ MVA Single Station Ambient Light Powered Irrigation Controller with 3/4" Actuator

About

The ECO1™ MVA ambient light (solar) powered, smart irrigation controller with ¾” actuator is factory preassembled to convert a 3/4" Champion and Orbit manual brass anti-siphon valve to automatic operation. Included in the package, you will find an adapter and seat-washer to fit 1" Champion, Orbit manual brass valves, 3⁄4" and 1" Rain bird manual plastic valves, and Orbit 3⁄4" and 1" manual plastic valves.

NOTE: Please select proper adaptor.

Programming: This controller uses seven programming buttons to navigate through its high resolution LCD icon based display. The controller’s four buttons (left, right, up and down arrows) are used to select or modify a program parameter, the large button in the center is used to accept the parameter change and move or skip to the next step or icon, the right lower button is used for manual on/off, and the left lower button is used for program off or to stop irrigation when it is raining.

Power
This controller requires light as the source of energy and will take about 45 minutes to charge
Review the instruction manual included with the unit for details.

Installation into a PVC pipe or to pipe thread

  1. Shut off the water supply.
  2. Remove the manual stem from the existing valve. If you are converting an anti-siphon valve, temporarily remove the anti-siphon cap (you will to install the actuator and the cap together).
  3. Replace any existing worn washers with the new ones provided.
  4. Install the controller with the actuator into the manual valve; using a wrench, tighten firmly, but do not over tighten.
  5. Rotate the flow control clockwise until completely closed.
  6. Turn on the main water supply.
  7. Press the manual on/off button to test the controller. A click will be heard indicating the valve is open (a manual operation icon will appear on the lower side of the screen.
  8. Now, rotate the flow control counter clockwise until the valve is operational and all sprinklers/sprayers are working evenly and to your satisfaction.
  9. Press the manual on/off button again to turn the controller off. A click will be heard indicating the valve is now close (The manual icon will disappear and the valve will close.
  10. Program the controller.
  11. If the controller is installed with a drip irrigation system, make sure to add a 15, 25 or 30 PSI pressure regulator to lower the pressure to the drip system, then install a 150 or higher mesh screen filter to protect the drip system, following with a swivel adapter to the drip tubing.

NOTE: If water continues to flow, turn the flow control slowly clockwise 1/4 turn at the time. Repeat steps 5-9 if necessary.
Review the instruction manual included with the unit for details

Adding a rain sensor or any other closed contact sensor

  1. If a rain sensor or other closed contact sensor is used, cut the yellow wires and add the sensor per the sensor instructions, making sure to use a waterproof wire connection.

Please let us know if these instructions were helpful to you by liking it or providing feedback below.




DIG-Logo-Tag
Homeowner Resources

Manuals
Videos & Articles
Catalogs

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2013 DIG Corporation water matters™ | All rights reserved

ECO1 Installation - MVA

×

Manual Actuator Conversion

×