-
- The TOP concept is designed for
first time installation, as well as for retrofitting any existing
sprinkler riser into an efficient 12
outlet drip Irrigation system. The TOP concept utilizes unique
self cleaning, pressure compensating emitters enabling long
- runs with even water distribution from
all outlets. This self cleaning characteristic, in addition to
double filtration, means low maintenance.
-
- Applications:
- Commercial
- Residential
- Median Strip
- Sprinkler conversion
- Indoor and outdoor
- Features:
- 12-Outlet emitter
- 12 Individually pressure compensating,
self flushing emitters
- Interchangeable emitters to
combine flow rates in a single head
- Color coded emitters and barbs
easily identify flow rates at each zone
- Backup mini-disk filter TM
- May be used with 1/8" .187
OD or 1/4" .256 ID distribution tubing
- Rugged materials to withstand
the most adverse conditions
- Install above grade or place
below grade in a 6" emitter box
- 1/4" elbow and barb allow
the use of 1/4" distribution tubing
- Inlet plugs provide closure
options of up to 8 emitters
- Specifications:
- Flow rates: .6, 1, 2.2 and 3.3
GPH (2.2, 3.8, and 12.5 l/h)
- Working pressure: 8-80 PSI (.56-5.6
kg/cm2)
- Each emitter individually filtered
(approximately 80 mesh)
- 1/2" female NPT thread
- Recommended filtration: 120
mesh
- Technical
information
- TOP specification
- Nozzle conditions during self
flushing mode
- Flow changes according to the position of
the diaphragm
- The TOP concept includes
self cleaning pressure compensating nozzles. The ability to compensate
for pressure fluctuations between 8 to 80 PSI is achieved through
the utilization of a silicone diaphragm and the design of the
water passage. The self flushing function works between 0 and
8 psi, and is achieved as follows: at 0-3 psi the flow is relatively
high and the nozzle is in flushing mode and the diaphragm is
completely open. As the pressure increases to between 3 to 8
psi, the diaphragm slowly begins to close, flow is still high,
but steadily decreasing.The diaphragm is closed between 8 to
80 psi, and the flow is constant opening and closing the system
will bring the TOP to a flushing mode.
|
|
|
-
- Models available:
- TOP-005 .6 GPH per zone color coded -black
- TOP-010 1 GPH per zone color coded- red
- TOP-020 2.2 GPH per zone color coded- green
- TOP-030 3.3 GPH per zone color coded -purple
- TOP-100 1 GPH per zone kit includes 1 head, 100 feet
1/8" distribution tubing, 8 caps, 12 bug plugs, 12 stakes
and 12 barbs
- TOP- 300- 3.3 GPH per zone kit includes 1 head, 100 feet
1/8" distribution tubing, 8 caps, 12 bug plugs, 12 stakes
and 12 converter barbs
|
Ordering Information |
|
Model |
Description |
|
TOP-005 |
.6 GPH per zone |
|
TOP-010 |
1 GPH per zone |
|
TOP-020 |
2.2 GPH per zone |
|
TOP-030 |
3.3 GPH per zone |
|
TOP-100 |
Kit w/ 1 GPH per zone |
|
TOP-300 |
Kit w/ 3.3 GPH per zone |
|
|
|
 Cover
Disk Filter
Caps
Nozzles
Body
Barbs
Elbows
-
-
-
- The TOP 12 zone drip head designed to
be used
- above grade or placed below grade in a
6" irrigation box.
T.O.P kits
 |
|
