|
|
-
- Solenoid with actuator
to convert most 3/4" and 1" brass or plastic manual
anti-siphon and angles valve to automatic operation
-
- Model 336.013
-
-
- Manual override
- Internal bleed
- Slow opening and slow closing
for smooth operation
- Contains all parts required
for conversion on most 3/4" and 1" brass or plastic
manual anti-siphon valves
- Valve may be extended up to
100' from controller with 14 gauge wire
- Built in flow control
- Specifications:
- Dry latching solenoid
- Power source: 18 volt DC (two
9 volt alkaline batteries)
- Power draw: .2 amps per cycle
- Temperature range: 38 to 130
degrees F (3-54 degree C)
- Operating pressure: 25 to 125
PSI (1.75 to 8.5 kg/cm2)
- Manual flow control can adjust
to 0 flow
- Controller
and Actuator Materials:
- Flexible cover: UV durable polyethylene
- Inner body: ABS
- Inner parts: acetal
- Solenoid inner metal parts:
stainless steel 303
- Actuator body: glass reinforced
nylon
- Diaphragm and rubber seal: EPDM
- Metal parts and screws: stainless
steel 303
- [Return to commercial front page]
|
Product directory 
Specifications 
Technical support 
Parts list