Commercial front page 

Home 

Product directory

Specifications 

Technical support 

 Parts list

 Single station battery operated controller and solenoid with a rain sensor connection
Using sleek contemporary design and many state of the art features. DIG'S 510 Series battery operated controllers offer your customers true flexibility and an exceptional value for use in installation areas without available power.  With the highest standards of quality and reliability never offered before, DIG'S 510 series provides sophisticated, yet easily operated controllers.
 MODEL 510.000S
 Application:
  •  Conversion of most 2-way AC solenoids to DC operation
 Features:
  • Four button with an integrated liquid crystal display (LCD)
  • Easy to read AM/PM clock
  • Four start times per day
  • Watering durations in 1 minute increments, from 1 minute to 12 hours
  • 7 day customized programming schedule or intervals from 1 to 30 days
  • Powered by two 9 volt alkaline batteries
  • Manual irrigation cycle via the controller
  • Water proof connection for rain sensor or any dry contact sensor
  • Withstands harsh climatic conditions
  • Completely waterproof
  • Can be mounted on a valve or on the wall inside the irrigation box
  • Rain delay up to 30 days
  • Internal manual bleed
  • Manual shut-off
  • Irrigation suspension override (rain mode)
  • Digital display, blinking low battery warning
  • Automatic, semi-automatic and manual operation
  • 24" solenoid wire with water proof connection to the controller
  • Program stored up to 20 seconds during battery change
  • Can be used with Weather-matic 7000 and 21000, Hardie, Richdel, Orbit, Toro 252, Buckner vp100 and Champion valves
Controllers Specifications:   Materials:
  • Controller dimensions: 4" W x 1 1/2" D x 6 1/4" H (10 cm W x 3.8 cm D x 16 cm H)
  • Dry latching solenoid
  • Power source: 18 Volt DC (two 9 volt alkaline batteries)
  • Power draw: .2 amp per cycle
  • Temperature range: 38 to 130 F (3 - 54C)
  • Color coded, 24" Dry contact sensor connection   
  • Solenoid adaptor thread 3/4"-20 UNES-2A
  • Body and cover: ABS
  • Solenoid body: acetal
  • Solenoid inner metal parts: stainless steel
 Solenoid Features:  
  • Quick connect adaptor with "o" ring for mounting on 3/4-20 thread
  • Color coded, 24" long wires with water proof connection to controller
  • Manual override