Application:

• Irrigation
• Municipal water supply
• Secondary filtration after gravel or sand filter

All New 2000 Series screen Filters Features:  The filtration unit consists of a stainless steel screen and protective plastic screen welded on the external suface of a PVC cylinder which make the filtering unit very strong and enable a better and easier maintenance and cleaning Body of screen made of PVC cylinder holed with spiral grooves on the exetrnal diameter, these grooves are unique and their function is important. They make the effective and actual fitration area to be the same as the external surface area of the PVC cylinder and not as a holes surface only. The spiralled grooves enlarge the filtration area by 3 to 4 times Intermediate plastic screen provide s physical protection and ensures long durability to the stainless steel filtrating screen by preventing the water pressure from "bending" the stainless steel screen into the holes of the PVC protective cylinder and by lifting the screen from the PVC cylinder surface it achieves additional improvement in the filtration area Available with manual or automatic drain valve located on side of the filter and with two pressure testing ports Series 2000 filter bodies and cover have a 100 micron extra durable polyester coating applied electrostatically and are oven-cured on a zinc phosphate layer for maximum anti corrosion protection Human engineering, the filter is very easy to dismantal and re-assembl in the field with cover upwards with no need to bend whan open Filters have horizontal inlet and outlet for in-line installation at 180 degree Available with flange connection The filter can be cleaned manually only Range of screen: 60 to 140 mesh

Performance and technical data: Operating pressure- up to 150 psi (10.5 bar) Maximum recommended working pressure 120 psi (8 bar) Available Model 2000 6" and 8" horizontal inlet and outlet with flange Maximum working temperature -140+ degree F (60+ degree C) Maximum recommended flow rate 6" -800 gpm (180 m3/h ) Maximum recommended flow rate 8" -1320 gpm (300 m3/h ) Horizontal inlet and outlet at 180 degree Materials: Housing:steel with a 100 micron extra durable polyester coating applied electrostatically and are oven-cured on a zinc phosphate layer Cylinder: PVC Screen: stainless steel screen and protective plastic screen "O" ring material: nitril rubber