Home
Technical data
New product
Contact us
Parts list
Comments
Site Map
Performance
at 30 PSI (2.0 bar)
Nozzle
Flow Rates (gph) & Diameters
Performance at 35 PSI (2.2 bar)
Nozzle
Flow Rates (l/h) & Diameters
DU% in Overlapping Irrigation
Ordering Information
Compact Micro Sprinkler
Model 52-940-xx
Filling the need for large diameter
micro sprinkler with a low flow and a low rain-ratio. Compact
micro sprinklers operate with two water jets in a smooth and
balanced manner, without damaging the soil surface on a wide
range of crops.
|
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||
| Filling the need for large diameter micro sprinkler with a low flow and a low rain-ratio. Compact micro sprinklers operate with two water jets in a smooth and balanced manner, without damaging the soil surface on a wide range of crops. |
- Applications:
- Overlapping irrigation in orchards and nut trees
- Overlapping irrigation in greenhouses and nurseries
- Overlapping irrigation in seedling
and flower beds
- Overlapping irrigation in field crops and vegetables
- Frost protection and cooling system for orchards and vegetables
- Features:
- Model 52-940-xx will shut off after operation and prevent dirt and insects from entering the sprinkler (insect proof)
- Excellent distribution uniformity at spacings of up to 30 x 30 ft (9 x 9 m) in open fields
- Low flow rate enables model 940 to operate with a large number of micro sprinklers in overlapping irrigation
- Average irrigation ratio: 0.039 inch per hour at 30 PSI and 0.161 inch per hour at 35 PSI in overlapping irrigation (gray nozzle 23 x 23 spacing)
- Simple construction without spring or seals
- Available on 1/2" female base or on spike assembly
- Low cost, made of durable plastic materials ensuring resistance to most chemicals and fertilizers used in irrigation for long trouble free operation
- Performance and Technical Data
- Material: polyacetal body and neoprene rubber seals
- Four nozzles provide flow rates from 47 to 79 GPH (180 to 300 l/h)
- Wetting diameter up to 50 feet (15 M)
- Operating pressure: 30 to 40 PSI (2.0 to 2.7 bar)
- Operating pressure in overlapping:
30 to 40 PSI (2.0 to 2.7 bar)
- Maximum spacing for overlapping: 30 x 30 ft (9 x 9 m) in open fields
- Pattern: 360 degrees
- Trajectory angle: 12 degreees
- Droplet size: large
- Recommended filtration: minimum 40 mesh (400 micron)
