6-Outlet PC Drip Emitter - Bubbler
DIG's 6-outlet high flow drip bubblers have individual flow-regulating emission devices, enabling long runs with even water flow throughout all the outlets at a wide range of water pressures. Available in two configurations and four flow rates.
Updated:07/16/10
Features:
- Pressure compensating range: 15-60 PSI (1.2-4.6 BAR)
- Large water passages with rolling diaphragms allow for debris to pass through without clogging
- Individual flow-regulated devices for each outlet
- Rugged materials to withstand adverse conditions
- Install above grade or place below grade in a 6" emitter box
- Available with bottom mounted side outlets or barb outlets to hold 1/4" distribution tubing
- Color coded body for easy identification
Specifications:
- Flow Rates: 4.5, 5.5, 8.2, and 9.7 GPH (17, 20.8, 31 and 36.8 l/h)
- Operating Pressure: 15-50 PSI (1-3.5 BAR)
- Inlet Size: 1/2" FNPT
- Outlet Size: 1/4" Barb and Barbed Elbow
- Use with 1/4" (.150-.160" ID) Distribution Tubing
- Filter Requirement: 120 Mesh
| Performance total flow rate per drip head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Number of drip heads |
Flow per outlet | |||||||
| 4.5 GPH | 0.7 GPM | 5.5 GPH | 0.9 GPM | 8.2 GPH | 0.13 GPM | 9.7 GPH | 0.16 GPM | |
| 1 | 27 | 0.45 | 33 | 0.55 | 49.2 | 0.82 | 58.2 | 0.97 |
| 5 | 135 | 2.25 | 165 | 2.75 | 246 | 4.93 | 291 | 4.85 |
| 10 | 270 | 4.50 | 330 | 5.50 | 492 | 8.20 | 582 | 9.7 |
| 15 | 405 | 6.75 | 495 | 8.25 | 738 | 12.3 | 873 | 14.5 |
| 20 | 540 | 9.00 | 660 | 11.0 | 984 | 16.4 | 1164 | 19.4 |
Materials:
- Body and Cover: High Impact Plastic
- Flow Regulating Device: PBT
- Diaphragm: Silicon
- Barb Outlets: Acetal
Dimensions:
- Dimensions: 2.25" W x 1.5" H (57 mm W x 38 mm H)
back
TOP 12-Outlet Drip Emitters | 6-Outlet PC Drip Emitter - Bubbler | 6-Outlet Adjustable Drip Emitter Bubbler | 4-Outlet PC Drip Emitter/Bubbler |
