Accessories

Features:

• High impact plastic
• UV-resistant
• For secure and easy installation without glue or clamps
• Fits all DIG 1/4" Micro-line™ dripline and distribution tubing with 4mm ID (.156 - .170 ID)
• Available with a combination of threads and barbs
• One piece construction

Specifications:

• Operating Pressure: Up to 30 PSI (2.1 BAR)

Materials:

• Acetal

Features:

• For installing a dripper or spray jet on a 1/2" riser
• Available with 10/32 thread or barb
• UV-resistant

Specifications:

• Operating Pressure: Up to 30 PSI (2.1 BAR)
• 1/2" FNPT x 10/32 Thread
• 1/2" FNPT x 1/4" barb

Features:

• Used to puncture holes when installing drippers and micro sprinklers in polyethylene tubing
• Easy grip handle constructed of durable plastic and non-corrosive materials
• Pro punch and deluxe punch pins can be replaced
• Deluxe punch cuts 1/2" polyethylene tubing and 1/4" distribution tubing with cutter in handle

Hose End Features:

• Small and large hose ends for easy insertion
• UV-resistant
• Made of polypropylene
• Operating Pressure: up to 60 PSI

Goof Plug Features:

• Used to plug holes in mainline or to stop flow out of the end of 1/4" distribution tubing

Features:

• Glues into the slip side of any 1/2" PVC fitting
• UV-resistant

Specifications:

• Operating Pressure: Up to 80 PSI (5.5 BAR)

Features:

• Hose or pipe thread male and female

Specifications:

• Operating Pressure: Up to 80 PSI (5.6 BAR)
• 3/4" MNPT or 3/4" MHT
• 3/4" FNPT or 3/4" FHT

Features:

• High impact plastic
• UV-resistant
• For secure and easy installation of 1/2" polyethylene and 1/4" distribution tubing
• Flow rate on stake is adjustable to off
• Stake with flow adjustment available with 10/32 thread

Features:

• Pre-assembled with rigid polyethylene (PE) riser (.160 ID x .300 OD)
• Flow rate on stake is adjustable from off to on
• Stake has a ¼" barb inlet
• Constructed of UV-resistant plastic material

Features:

• Pre-assembled with 13" clip stake, rigid polyethylene (PE) riser (.160 ID x .300 OD) and barb
• Available in four length from 8" to 16"
• Constructed of UV-resistant plastic material

Features:

• Pre-assembled with 13" clip stake, 24" vinyl micro tubing (.160 ID x .270 OD) and barb
• Constructed of UV-resistant plastic material

Features:

• Pre-assembled with rigid polyethylene (PE) riser (.160 ID x .300 OD)
• Constructed of UV-resistant plastic material

Features:

• Available in 8" or 12" with 1/2" MNPT or with 1/4" barb
• Unique design incorporates a pressure activated, low friction, upper stem seal and a second stage piston seal to insure positive sealing
• 1/4" side outlet can be used with 1/4" (.150-.170 ID) distribution tubing and installed on any polyethylene tubing

Specifications:

• Operating Pressure: 15-35 PSI (1-2.5 BAR)
• Overall Body and Stem Height: Long: 13" (33 cm) Short: 9" (22 cm)
• Extension Height:
  • 8" Pop-Up = 5" (12 cm) Total 13" (33 cm)
  • 12" Pop-Up = 9" (22 cm) Total 21" (53.34 cm)
• Filter Requirement: 120 Mesh