Drip System Components

Adjustable Pressure Regulators

Direct acting pressure regulators are specifically designed for use where accurate and reliable control of line pressure is required, regardless of fluctuations in upstream pressure and/or flow. The use of a rolling diaphragm completely separates the spring assembly from dirt or contaminants in the flow stream and provides long, trouble-free service while ensuring immediate response to flow and pressure variations.

Air Relief Valve

The air vacuum relief valve allows air to exit and enter the dripline laterals during initial system startup use, and prevents suction of debris into the drip emitters under vacuum conditions when the system is shut down.

Drip Zone Assembly

DIG's 3/4" drip zone assemblies come with all the components necessary to start any drip or micro sprinkler installation. Each unit comes assembled with a 24 VAC valve, battery operated controller LEMA 1600 HE, DC or AC solenoid with filter and an adjustable or preset pressure regulator. Controller Solenoid Quick Reference

Flush Valve

DIG’s durable & reliable 3/4" flush valve helps prevent the clogging of drip systems and driplines by automatically flushing out sediment and small particles whenever the system valve opens and closes

Preset Pressure Regulators

DIG's 3/4" pipe thread preset pressure regulators are available in three different pressure ranges and they are used only with pipe thread fittings and components. Use for drip tape, drip system, micro sprinklers. These poressure regulators should be installed after the filter.

Shut Off Valves

Use DIG's shut off valves for control of individual driplines and laterals.