710-xxxp Propagation & Irrigation Battery Operated Controller


710p_sec_head

The 710-xxxP battery operated controller employs the latest engineering improvements for better operation in the application or irrigation and propagation of greenhouses and nurseries. The 710-xxxP series controllers are powered by 1, 9-volt battery and wrapped in a compact housing design that provides enhanced waterproofing capability. The 710-xxxP controllers operates in conjunction with DIG's 2-wire DC solenoid and are available with 3/4" to 2" inline valves

Note: Series 710-xxxP controllers replace Series 510-XXXP controllers


  Updated:05/17/12

Programming Features:

  • Standard watering cycle: Seven day calendar with four start times per day
  • Cyclical watering cycle: Once every day and up to once every 30 days with one start time per day
  • Repeat watering cycle: Once every 1 hour and up to once every 23 hours
  • Repeat watering cycle: Once every minute and up to once every 45 minutes with open window to start at am or pm, and window to close at am or pm.

Controller Features:

  • Weekly or cyclical program
  • Four start times per day in weekly mode
  • Station run time from 1 second to 12 hours in 1 second increments
  • Watering schedule 7-day weekly program or cyclical from once a month to once every minute or hour
  • Water budget from -90% to +90% in 10% increments
  • Semi-automatic or manual operation
  • Rain delay up to 30 days
  • Same programming as 510P controller
  • Withstands harsh climatic conditions ° Completely waterproof
  • Can be mounted on a valve or on valve box wall
  • Adaptable to a wide range of valves using DIG valve adapters, Model 30-xxx
  • Available with rain sensor connection
  • Operates using 1, 9-volt alkaline battery
  • Up to 2 year battery life
  • 3 year warranty

Specifications:

  • Valves Flow Rate:
    • 3/4": .1-28 GPM (.23-6.4 m3/h)
    • 1": .2-35 GPM (0.45-8 m3/h)
    • 1 1/2": 20-132 GPM (4.5-30 m3/h)
    • 2": 30-160 GPM (6.8-36 m3/h)
  • Operating Pressure: 10-150 PSI, (.7-10.5 BAR)
  • Temperature Range: Up to 170°F (76.2°C)
  • Body Style: Globe
  • 3/4", 1", 1 1/2" and 2" FNPT Inlet and Outlet

Electrical Specifications

  • Two-way Magnetic Latching, Normally Closed, Bi-Directional Pulse
  • Coil Operating Data:
    • Coil Resistance 5 +/- 0.03 W, Minimum Pulse 10 mS Duration at 6-9 Volts
    • Red + and White - To Latch Open
    • Red - and White + To Latch Closed

Materials:

  • Valve Body and Cover: Glass Reinforced Nylon
  • Diaphragm: Nylon Fabric Reinforced Polyisoprene (NR)
  • Metal Parts and Screws: Stainless Steel 303
  • Solenoid Housing Over Mold: Nylon
  • Solenoid Housing Base: Nylon
  • Inside Housing Stainless Steel Part: 430F
  • Plunger Rubber Cap: EPDM
  • O-ring: Buna-N
  • Plunger Cup: EPDM


back
9001DC Battery Powered Hose End Irrigation Timer with LCD Display | 710-xxxp Propagation & Irrigation Battery Operated Controller | 9001EZ-C Battery Powered Hose End Irrigation Timer | 700 Series Battery Operated Controllers | 700 Series Battery Operated Controllers with Inline valves and actuators | R710 DC Valves and Actuators | R710DC Solenoid | 500 Series Battery Operated Controllers | Single Station Propagation or Irrigaion Battery Operated Controllers | Single, 4 and 6 Station Battery Operated Controllers | DC Solenoid and In-Line Valve | DC Solenoid Actuator |

Loading...