6-Outlet Adjustable Drip Emitter Bubbler

6-outlet_adjustable_emitter_sec_head

The 6-outlet adjustable drip emitter is a high flow emission device with 6 outlets that have adjustable flow between 0-20 GPH (0-75 l/h). It is available with barbed outlets that swivel so the flow dial tucks under the head after installation. This system is designed for retrofit installations above or below grade.


  Updated:07/16/10

Details Part Numbers

Features:

  • Swivel barb outlets allow installation flexibility and protection of the flow control
  • Made of rugged materials to withstand adverse conditions
  • Can be installed above or below grade in a 6" (15 cm) emitter box

Specifications:

  • Flow Rate is Adjustable Between 0-20 GPH (0-75 l/h) Per Each Outlet
  • Operating Pressure: Up to 50 PSI (3.5 bar)
  • Used with 4 mm (.150 -.160 ID) Distribution Tubing
  • Inlet Side: 1/2" Female Thread
  • Filter Requirement: 80 Mesh


back
TOP 12-Outlet Drip Emitters | 6-Outlet PC Drip Emitter - Bubbler | 6-Outlet Adjustable Drip Emitter Bubbler | 4-Outlet PC Drip Emitter/Bubbler |

Loading...