Preset Pressure Regulators

Preset_pressure_regulator_sec_head

DIG's 3/4" pipe thread preset pressure regulators are available in three different pressure ranges and they are used only with pipe thread fittings and components. Use for drip tape, drip system, micro sprinklers. These poressure regulators should be installed after the filter.


  Updated:02/03/12

Details Part Numbers

Features:

  • Three preset pressures available
  • Flow rate from .1-15 GPM (6-900 GPH)
  • Reliable control regardless of fluctuation in upstream pressure or flow
  • Withstands severe water hammer
  • Can be installed above or below ground

Specifications:

  • Flow Rates: .1-15 GPM (.22-3.4 m3/h)
  • Pressure Range: 20, 25 and 30 PSI (1.3, 1.7 and 2 BAR)
  • Maximum Recommended Flow: 10 GPM
  • Maximum Working Pressure: 80 PSI (5.5 BAR)
  • Weight: .20 lb (.09 kg)
  • 3/4" FNPT x 3/4" MNPT

Materials:

  • Body: Plastic
  • Spring: Stainless Steel 304


back
Adjustable Pressure Regulators | Air Relief Valve | Drip Zone Assembly | Flush Valve | Preset Pressure Regulators | Shut Off Valves |

Loading...