Single Outlet Drip Emitters
DIG drip emitters come in a wide variety of configurations and flow rates, including single outlet PC and non PC drip emitters, adjustable emitters and flag emitters. DIG drip emitters are available with barb inlets, barb inlets and outlets, or on a stake with a barb.
back
Pressure Compensating Drip Emitters
DIG's most advanced dripper. Our PC drippers allow longer runs with equal flow from each dripper at any pressure between 10 and 55 PSI. They are self-cleaning, utilizing a silicone diaphragm which presses against the water passage as pressure and flow fluctuate to provide preset flow rates; when the pressure is below 10 PSI, the diaphragm is completely open, allowing particles to be washed through. PC drippers are very durable and can withstand harsh conditions.
Button Drip Emitters
Button drippers with turbulent flow, which slows the velocity of the water to provide a predetermined flow rate at a preset pressure. Turbulent flow drippers regulate water flow by dissipating energy in friction against the walls of the labyrinth like water passage. Button drippers will provide the suggested flow rate at the recommended pressure of 25 PSI, and as the pressure increases so will the flow.
Adjustable Drip Emitters
Adjustable flow from 0 to 10 GPH. When the cap is rotated the flow from this dripper and the radius of the wetted area can be adjusted from a gentle stream patte, to drip, to off. This allows you to adjust the flow to each individual plant. Twisting the dial on the dripper towards the "+" or the "-" signs will allow you to increase or decrease the flow.
Flag Drip Emitters
Low flow drippers which allow water to flow smoothly, without turbulence, as the water slows in velocity. The drippers may be twisted open for cleaning. The drippers provide the suggested flow rate at a pressure no higher then 25 PSI. The drippers have a 1/4" barb inlet and outlet.