Sensors
Switch Type Sensor Adapter
The SKIT switch-type sensor weatherproof adapter provides a quick, reliable way to connect compatible rain, freeze, moisture and other normally closed switch-type sensors either directly to the LEIT series of irrigation controllers or directly to one of the series of micro- power actuators.
Relay Interface Kit
The RKIT Relay interface provides a simple, reliable, waterproof way to switch a relay of an AC or DC circuit. The LEITseries controllers can be used to turn a pump on and off. To enable the LEIT controller to use the RKIT to turn on a pump, the RKIT must be connected to the station connector strip unit labeled MV/P. If any other AC or DC equipment is needed for relay switching, it can be connected to any other available station connector strip.
Switch Type Sensor Adapter
Features:
- Waterproof construction
- Easy to install
- Adapts to a wide range of sensors
Sensor Recommendation:
- Recommended rain sensors are the HUNTER Mini-Clik II, Model 502 and the RAIN BIRD RSD.
- Recommended moisture sensors are the IRROMETERRA and TGA series.
- Recommended freeze sensor is the HUNTER Freeze Click.
Mechanical Specifications:
- Compatible with normally closed switch type sensors only
- Comes with 12" 12 gauge wire
- Length: approx. 1.25" (3.1 cm)
- Diameter: approx. 0.75" (1.9 cm)
- Weight: approx. 2 oz (56 g)
Relay Interface Kit
Features:
- Waterproof construction
- Easy to install
Choosing the Correct RKIT Model:
- The RKIT 8810S is used for installation with a LEIT 4000, LEIT X, XR and XRC
Electrical Specifications:
- High Power V2 Pulse Input
- Rated Load 10A, 250 AC or 30V DC
- Max Voltage 380 VAC 125 VDC
Mechanical Specifications:
- Length: approx. 1.9" (4.7 cm)
- Diameter: approx. 1.1" (2.7 cm)
- Weight: approx. 8 oz (220 g)
back