LEMA 1600HE Solenoid & Valve Adapters

Lema_1600he_solenoid_&_valve_adapters_sec_head

DIG LEMA 1600HE is an encapsulated, zero maintenance, high efficiency watertight, 2-way magnetic solenoid actuator that requires minimal power for use with the LEIT series controllers. The LEMA 1600HE can replace conventional solenoids on most valves, enabling the LEIT irrigation controllers to operate most brand name valves using DC power at a long distance of up to 4500 ft with 14 AWG wire.

Valve Adapters

Valve adapters are avaialbe for a wide range of plastic or bras valves and are made of durable platic.

DIG valve adapters are compatible with the following valves:

  • Model 30-920 use with BERMAD series 200, HIT series 500, DOROT series 80, GRISWOLD series 2000, DW and BUCKNER series VB valves
  • Model 30-921 use with RAIN BIRD DV, DVF, PGA, PEB (3/4" and 1" only), GB, EFB-CP, BPE, PESB (3/4" and 1" only) and ASVF valves
  • Model 30-922 use with HUN TER series ASV, HPV, ICV, PGV, SRV, IBV and ASVF valves
  • Model 30-923 use with WEATHERMATIC series 12000, 21000 valves
  • Model 30-924 use with IRRITROL series 100, 200B, 205, 217B, 700, 2400, 2500, 2600 and TORO series 220, P220 valves
  • Model 30-925 use with SUPERIOR series 950, HUN TER HBV and TORO series 252 valves (1.5" and larger)
  • Model 30-926 use with RAIN BIRD series PEB and PESB (1 1/2" and 2" only) valves

Details Technical Data Part Numbers Downloads

Features:

  • Designed to work with LEIT 4000 and LEIT X or XRC controllers only
  • Adaptable to a wide range of valves using DIG valve adapters
  • Sealed plastic over molding technique for waterproof construction
  • Encapsulated plunger and spring for reliable operation
  • Internal bleed, manual override for manual ON/OFF
  • Surge protected and built in self diagnostic capability for short wire or open wire failure
  • Uses 18 gauge two color coded 18" wires

Mechanical Specifications:

  • Solenoid Actuator Thread: 11⁄16"-12 UN
  • Pressure Range: 10-150 PSI (.7-10.5 BAR)
  • Control Orifice: 0.62" ± 0.001 (1.6 mm)
  • Pilot Flow: Minimum .075 GPM at 80 PSI (2.83 l/h at 5.6 BAR)
  • Temperature: 32-170°F (0-77°C)
  • Weight (without adapter, handle and electronics): 4.0 oz. (113 g)
  • Total Weight: .4 lbs
  • Leads: 18" (45 cm) AWM 1015 18 AWG VWred and white wires

Materials:

  • PC Board Housing: ABS
  • Solenoid Housing Over Mold: Nylon
  • Solenoid Housing Base: Nylon
  • Inside Housing Stainless Steel Part: 430F
  • Plunger Rubber Cap: EPDM
  • "O" ring: Buna-N

Dimensions:

  • Length: 2.33" (6 cm) (without adapter, handle and electronics)
  • Diameter: 1.206" (3.6 cm)

Valve Adapters

  • Available for a wide range of plastic or brass valves
  • Made of durable plastic

Valve Adapter Materials:

  • Adapter: Nylon
  • O-ring: Buna N
  • Sleeve: Poly


back

LEMA 160HE Valves | LEMA 1600HE Solenoid & Valve Adapters | Drip Zone Assembly for LEIT 4000, X and XRC | LEIT Key | Mounting Column | Mounting Kits | Stainless Steel Enclosure | Door Assembly | Sensors |

Loading...