Micro Sprayer Series 038

Micro_sprayer_series_038_sec_head

Designed for use in greenhouses, 52-038-xx micro sprayers produce fine droplets and come in a wide range of flow rates. Ideal for maintaining conditions conducive to propagation and germination. An optional antileak device prevents dripping at the beginning and the end of each irrigation cycle, keeping the entire line pressurized.

Applications:

  • Use in germination, seeding and rooting in greenhouses and nurseries
  • Use for overhead irrigation, propagation and cooling in greenhouses and nurseries

Details Part Numbers

Features:

  • Excellent performance with uniform water distribution
  • Color coded nozzles for flow rate identification
  • Modular design allows for a wide range of interchangeable components
  • Suitable for upright and inverted position

Benefits:

  • Maintains constant humidity or cooling in greenhouses
  • High uniformity due to distribution accuracy and low precipitation rate

Performance and Technical Data:

  • Material: Polyacetal
  • Flow Rates From 9 to 42 GPH (35 l/h to 160 l/h)
  • Nominal Flow Rate at 29.4 PSI
  • Wetting Diameter: 6.5' to 13' (1.9 to 3.9 m)
  • Operating Pressure: 20 to 35 PSI (1 to 2.4 bar)
  • Operating Pressure For Overlap Irrigation: 35 PSI (2.4 bar)
  • Pattern: 340°
  • Trajectory Angle: Approximately 1°
  • Average Droplet Size: .0008" (0.2 mm) Very Fine at 45 PSI
  • Filter Requirements: 120 Mesh (130 micron) up to 24 Gph, 24 to 42 GPH 80 Mesh (180 micron)
FLOW RATE AND DIAMETER
Model 52-038-09 52-038-13 52-038-15 52-038-18 52-038-24 52-038-32 52-038-42
Nozzle colors Lt. blue Violet Gray Black Green Red Brown
Nozzle size .031" .039" .043" .047" .051" .059" .071"
NOMINAL FLOW RATE at 29.4 PSI (2 bar)
Flow rates (GPH) 9 13 15 18 24 32 42
Wetting diameter (feet) 8 8 9 9 10 11 12
PERFORMANCE AND TECHNICAL DATA INVERTED AT 6' (1.80M) HEIGHT
PERFORMANCE at 20 PSI (1.4 bar)
Flow rates (GPH) 7.8 11.1 13.3 15.5 20.0 26.6 35.5
Wetting diameter (feet) 6.5 7 8 8.5 9 10 11
PERFORMANCE at 25 PSI (1.7 bar)
Flow rates (GPH) 9.6 12.4 14.9 17.4 22.3 29.7 39.7
Wetting diameter (feet) 7.3 8 9 9.2 9.7 10.5 11.7
PERFORMANCE at 30 PSI (2.1 bar)
Flow rates (GPH) 9.5 13.6 16.3 19.0 24.4 32.6 43.4
Wetting diameter (feet) 8 9 9.8 10 10 11 12
PERFORMANCE at 35 PSI (2.4 bar)
Flow rates (GPH) 10.3 14.7 17.6 20.5 26.4 35.2 46.9
Wetting diameter (feet) 8.4 9.2 10 10.4 10.7 11.5 13
Rectangular spacing (ft x ft) 3 x 4 3 x 4 3 x 4 3 x 4 4 x 5 4 x 5 4 x 5
Application rate (in/h) 1.4 2.0 2.3 2.7 2.1 2.3 3.1


Model 52-038-xx for inverted propagation and irrigation

The tables below represent recommendations and solutions to achieve a high level of uniformity within a specific area. This spacing will achieve the best results with high coverage and uniformity, and can also achieve a lower system cost with higher efficiency.

Step 1: Select the micro sprayer flow and application rate
Step 2: Select the bench width
Step 3: Select the micro sprayer spacing

Based on this selection you can determine the application rate in inches per hour

Low Application Rate, 6' Height, 1' Lateral Space
Bench Width
Model # Measurement 3' 4' 5' 6' Spacing
52-038-09
LT. BLUE		 CU 82% 80% 3
INCHES/HR 1.15 1.08
% OF WATER 70% 87%
52-038-13
VIOLET		 CU 84% 84% 3
INCHES/HR 1.28 1.25
% OF WATER 70% 72%

High Application Rate, 6' Height, 1' Lateral Space
Bench Width
Model # Measurement 3' 4' 5' 6' Spacing
52-038-15
GRAY		 CU 86% 85% 83% 3
INCHES/HR 0.42 0.39 0.34
% OF WATER 56% 58% 62%
52-083-24
GREEN		 CU 85% 84% 81% 3
INCHES/HR 3.50 3.70 3.90
% OF WATER 61% 64% 67%
52-038-32
RED		 CU 89% 89% 87% 3
INCHES/HR 3.25 3.05 2.92
% OF WATER 70% 72% 86%



back

EXL-Fogger Series 500 | Micro Sprayer Series 038 | Mini-Compact Micro Sprinkler Series 866 | Minisprinkler Series 700 | Mini-Compact Sprinkler Series 861 | Flow Regulated Mini-Compact Micro Sprinkler Series 861 | Compact Micro Sprinkler Series 961 | Antileak Device | Multi-Outlet Drip Emitters | Propagation AC Controllers | Propagation DC Controller | Accessories |

Loading...