Microsprinklers & Spray Jets
Wide configuration of micro sprinklers in various flow rates and diameters to fit any application.
Product Categories
- Hose end timers, Battery operated Controllers & AC Controllers
- Starter Kits
- Head Assembly
- Retrofits Drip & Accessories
- Drip Tubing & Micro Tubing
- Drip Line, Drip-Soaker Hose & Drip Tape
- Drip Emitters
- Microsprinklers & Spray Jets
- Foggers & Misters
- Drip Fittings
- Accessories
- Cooling Mist Kits & Accessories
Spray Jets on Threaded Barb
Spray jets on 10/32" thread with various spray patterns: 360°, 180°, and 90°. Covers up to 12' full circle using 14 GPH. Available in packs of 10 and 50
- 110B-24 : locator no. 49 : unit pack. 10 : Blue : 90º pattern - coverage up to 7'
- 111B-24 : locator no. 48 : unit pack. 10 : Black/Blue : 180º pattern - coverage up to 8'
- 112B-24 : locator no. 47 : unit pack. 10 : Red/Blue : 360º pattern - coverage up to 12'
Updated:07/16/10
Spray Jet Assembly with Micro Tubing, 13" Stake and Barb
DIG's micro spray jets have a flat pattern with low flow and can be used for groundcover, flowerbeds and oddly shaped areas. Available in 90°, 180° and 360° coverage, the spray jet is recommended for watering that requires small droplet size with low precipitation rates.
- 107-1B : Red : 360 Degree
- 108-1B : Green : 180 Degree
- 109-1B : Blue : 90 Degree
Updated:06/16/11
Spray Jets on 13" Spike
Complete assembly with 24" microtube, barb and 13" spike with various heads for a variety of spray patters: 360°, 180°, 90° and strip. Covers up to 12' full circle at 14 GPH.
- 110-1B-15 : locator no. 49A : Blue : 90º pattern - coverage up to 7'
- 111-1B-15 : locator no. 48A : Black/Blue : 180º pattern - coverage up to 8'
- 112-1B-15 : locator no. 47A : Red/Blue : 360º pattern - coverage up to 12'
- 113-1B-15 : locator no. 42A : Strip pattern - coverage up to 17'
Updated:07/16/10
12" Pop-Up with Spay Jet
Complete assembly with 24" microtube and barb with various heads for a variety of spray patterns: 360°, 180°, and 90°. Cover up to 12' full circle using 14 GPH
Ideal use for these models is high ground-cover, flower-beds, and shrubs. The Pop-up can be installed to the 1/2" poly tubing by connecting the barb and it should be raised 4" to 8" above the ground. Ideal spacing for the four models: 4' to 6' between the Pop-up sprayers.
- 12090 : locator no. 49B : Blue : 90° pattern - coverage up to 7'
- 12180 : locator no. 48B : Black/Blue : 180° pattern - coverage up to 8'
- 12360 : locator no. 47B : Red/Blue : 360° pattern - coverage up to 12'
Updated:07/16/10
Sprayer on PE Riser with Adjustable 8" Stake
Adjustable stake sprayers have a 6" polyethylene (PE) riser assembly on an 8" stake with 1/4" barb. Available in 180° and 90° patterns with a very fine spray. The flow rate can be adjusted from 0 to 14 GPH; adjusting the flow will increase or decrease the spray coverage.
Ideal use for this model is for ground-cover, flower-beds, and shrubs. Ideal spacing for the four models: 4' to 6' between the sprayers.
- 210-1B : locator no. 48C : unit pack. 2 : Blue : 90°pattern – coverage is adjustable up to 7'
- 211-1B : locator no. 49C : unit pack. 2 : Black/Blue : 180°pattern – coverage is adjustable up to 8'
Updated:07/16/10
Adjustable Spray Jet on a 10/32 Thread
These models are available in a variety of fine spray patterns: 360°, 180°and 90°. The flow can be adjusted from 0 to 20 GPH. The spray diameter will increase or decrease when adjusting the flow.
The 10/32 thread models can be installed on the 1/2" poly tubing, using #58, semi-rigid riser with barb, or raised above the ground with a #68, spike assembly.
- 309B : locator no. 93A : unit pack. 2 : 90°pattern – coverage is adjustable up to 18'
- 308B : locator no. 92A : unit pack. 2 : 180°pattern – coverage is adjustable up to 20'
- 300B : locator no. 91A : unit pack. 2 : 360°pattern – coverage is adjustable up tp 25'
Updated:07/16/10
Adjustable Spray Jets on 13" Spike
Complete assembly with 12" microtube, barb and 13" spike. Spray jets available win a variety of spray patterns: 360°, 180°, or 90°. The flow rate is adjustable from 0 to 30 GPH; adjusting the flow will increase of decrease the spray coverage.
- 309-1B : locator no. 93 : 90°pattern – coverage is adjustable up to 18'
- 308-1B : locator no. 92 : 180°pattern – coverage is adjustable up to 20'
- 300-1B : locator no. 91 : 360°pattern – coverage is adjustable up to 25'
Updated:07/16/10
0-20 GPH Adjustable Mini Sprayers on a Stake with 360-Degree Pattern
The adjustable mini sprayers on a stake feature flow rates from 0 to 20 GPH with a gentle spray pattern. Twisting the dial on the mini sprayers cap towards the "+" or the "-" signs increases or decreases the flow. The radius of the mini sprayers and the wetted area are adjusted from a gentle spray pattern to off. This feature allows the user to adjust the flow on a group of plants as needed. The maximum number of mini sprayers on the 1/2" drip tubing will be limited due to the unit high flow.
- 410B : locator no. 101 : unit pack. 3 : 5" stake with a 1/4" barb attached
- 410PRO : unit pack. 25 : 5" stake with a 1/4" barb attached
Updated:01/27/11
Compact™ Microsprinkler on 13" Spike
Covers up to a 40' full circle and has a red nozzle with flow rates of up to 32 GPH and water using a turbine mechanism for a single stream. This micro sprinkler has a fixed 360° spray patte. A maximum of seven large diameter micro sprinklers (spaced 20' apart) may be installed on the 1/2" poly tubing. Ideal spacing is 16' to 20' between the sprinklers. Available in packs of 1 on spike assembly.
- 961-1B : locator no. 97 : 360° pattern
Updated:07/16/10
Compact™ Adjustable Microsprinkler on 13" Spike
Covers up to an 18' full circle and has a red nozzle with flow rates of up to 32 GPH and water using a turbine mechanism for a single stream. This micro sprinkler may be adjusted to cover between 30° and 330°. A maximum of seven large diameter micro sprinklers (spaced 20' apart) may be installed on the 1/2" poly tubing. Ideal spacing is 16' to 20' between the sprinklers. Available in packs of 1 on spike assembly.
- 961P-1B : locator no. 96 : Adjustable pattern between 30° to 270°
Updated:07/16/10
Micro sprinkler on 13" Spike, 14 GPH, 360º
Complete microsprinkler assembly with 24" microtube, barb and 13" spike. The full circle pattern is adjustable covering up to a 25' diameter at a flow rate of to 14 GPH.
- 8855-1B : locator no. 44 : 14 GPH, 360º pattern
Updated:07/16/10
Micro sprinkler on 13" Spike, 21 GPH
Complete microsprinkler assembly with 24" microtube, barb and 13" spike. The adjustable spray diameter covers up to 26' diameter when set as a full circle and with flow rate of 21 GPH. Includes colored insert for 180o, 90o and strip sprays
- 8855-1GB : locator no. 40 : 21 GPH, 90º, 180º, 360º pattern
- 8855-5GB : unit pack. 5 : on 13" spike
Updated:07/16/10
Flow Regulated Micro sprinkler on a 13" Spike, 360º, 7 GPH
This full circle spinner type micro sprinklers on spike assembly with medium size droplets. This micro sprinkler has a flow rate of 7 GPH, and up to 15' diameter regardless of pressure fluctuation along the line. The micro sprinkler can achieve a consistent flow rate in a system with pressure fluctuations from 20 to 60 PSI or in an area with difficult topography. Available in packs of 1 with spike assembly.
- 507-1B : locator no. 100 : 360º pattern, 7GPH, 16' diameter
Updated:07/16/10
Insect Proof Mini-Compact Micro sprinkler on 13" Spike
Spinner type micro sprinkler with brown nozzle has medium size droplets and is assembled with spike and micro tubing. Micro sprinkler flow rate is 40 GPH and coverage is up to a 28' full circle. Use #45 micro sprinkler for ground-cover, flower-beds, and large trees. The anti-insect spinner will close when the irrigation cycle is complete. Ideal spacing for this model: 15' - 19' between the sprinklers, and 15' to 20' between the laterals.
- 861-1B : locator no. 45 : Brown : 360º pattern, 42 GPH, 28' diameter on 13" spike
Updated:07/16/10
Ray Jet on 10/32" Threaded Barb
The ray jet on a threaded barb is for an individual shrub, tree or small area. The spray coverage has a diameter of up to 5' (full circle) and uses 10 GPH. There are interchangeable tips offering various spray patterns: 180°(color code: yellow), 90° (color code: green).
- 9950BB : locator no. 41 : unit pack. 3 : 360º, 180º, 90º on 10/32" threaded barb
Updated:07/16/10
Ray Jet on 13" Spike
Complete assembly, 24" micro tubing, barb and spike. Spray jet gives a flow rate of 10 GPH and coverage of up to 13' full circle when installed on a spike assembly (spike is 8" to 10" above the ground). Use for flower-beds, ground-cover, and small trees. Prepackaged jet sprayers come with additional heads for 90° and 180° with up to a 4' radius. The additional heads can be snapped to the top of the jet. Ideal spacing for the sprayers is 3' to 5' apart
- 9950-1B : locator no. 41 : 360º, 180º, 90º on 13" spike
Updated:07/16/10
Mini-Sprinkler on 13" Spike
A complete mini-sprinkler assembly with 24" microtube, barb and 13" spike.
- 8809-1B : locator no. 94 : Blue : covers up to a 10' full circle with flow rates of up to 10 GPH
- 8824-1B : locator no. 95 : Green : covers up to a 14' full circle with flow rates of up to 24 GPH
Updated:07/16/10