Products -> Drip Tubing & Micro Tubing

Drip Tubing & Micro Tubing

Use as the main and sub lateral of drip irrigation system in which drippers and micro sprinklers can be attached to.

Drip Tubing & Micro Tubing
1/8" Vinyl Micro tubing

1/8" Vinyl Micro tubing

Made of vinyl and designed to be used exclusively with the DIG Maverickā„¢ 12-outlet Drip Head as a feeder line from the Maverickā„¢ to the plant. The 1/8" vinyl micro tubing is .118 ID and .187 OD.

  • B34 : Black : 50' coil 1/8" (.118 ID x .187 OD)

  Updated:07/16/10
 1/4" Vinyl Micro tubing

1/4" Vinyl Micro tubing

Made of vinyl it is the primary feeder line from the 1/2" poly tubing to the plants. It may also be used as the basis for a complete system for containers and patio plants. Maximum working pressure for the micro tubing is 60 PSI, and maximum flow rate is 35 GPH. Available in lengths of 50' in black, 100' in brown, and 500' in black. DIG 1/4" vinyl micro tubing is .156 ID and .245 OD.

  • B38 : Black : 50' coil 1/4" (.156 ID x .245 OD)
  • B38100B : Black : 100' coil 1/4" (.156 ID x .245 OD)
  • B38100 : Brown : 100' coil 1/4" (.156 ID x .245 OD)
  • B38500 : Black : 500' coil 1/4" (.156 ID x .245 OD)

  Updated:01/20/11
1/4" Low-Density Polyethylene Micro Tubing with .250 OD

1/4" Low-Density Polyethylene Micro Tubing with .250 OD

DIG's 1/4" micro tubing is manufactured with Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin with 5% UV protection. This extra durable micro tubing is used as a component in the installation of drip irrigation systems. Use to extend a drip emitter or micro sprinkler from the feeder line into the plant area or use the 1/4" micro tubing as the main line. The FINGERPRINT linear low-density polyethylene resins were developed to stand the test of time in both agricultural and landscaping applications.

  • B38P : Black : 50' coil 1/4" (.170 ID x .250 OD)
  • B38100P : Black : 100' coil 1/4" (.170 ID x .250 OD)
  • B38500P : Black : 500' coil 1/4" (.170 ID x .250 OD)
  • B381000P : Black : 1,000' coil 1/4" (.170 ID x .250 OD)

  Updated:01/27/11
 1/2" Low-Density Polyethylene Tube (Poly tubing)

1/2" Low-Density Polyethylene Tube (Poly tubing)

Made of polyethylene and used for main lines and laterals. Unlike PVC pipe, it comes in coils for easy handling and storage, and weighs about 4 pounds per 100'. Maximum working pressure for the poly tubing is 60 PSI and maximum flow rate is 220 GPH (3.6 GPM). The poly tubing coils are available in lengths of 50', 100', 200', 500', and 1000'.

  • B35 : Black : 50' coil 1/2" (.600 ID x .700 OD)
  • B36 : Black : 100' coil 1/2" (.600 ID x .700 OD)
  • B39 : Black : 200' coil 1/2" (.600 ID x .700 OD)
  • B37 : Black : 500' coil 1/2" (.600 ID x .700 OD)
  • B43 : Black : 1,000' coil 1/2" (.600 ID x .700 OD)

  Updated:07/16/10

Loading...