Products -> Retrofits Drip & Accessories

Retrofits Drip & Accessories

Retrofit a 1/2" riser to an efficient drip irrigation system without disturbing the flow of the sprinklers that are on the same line.

Maverick ™ 12-Outlet Retrofit Drip Kit, 1/2" FPT

Maverick ™ 12-Outlet Retrofit Drip Kit, 1/2" FPT

Converts an existing 1/2" sprinkler riser to a 12-outlet, low flow drip irrigation system. 12-outlet PC drip head operates at any pressure between 10 and 80 PSI. It may be used with 1/8" or 1/4" micro tubing, a 1/4" laser soaker hose, or with any dripper. All parts included. Recommended when converting an entire sprinkler system to drip.

  • PC1201 : 1 GPH per zone
  • PC1202 : 2 GPH per zone
  • PC1204 : 4 GPH per zone

  Updated:07/16/10
Maverick ™ 12-Outlet Retrofit Drip Kit, with 1/8" micro tubing

Maverick ™ 12-Outlet Retrofit Drip Kit, with 1/8" micro tubing

The Maverick™ 12-outlet drip head is designed to retrofit any 1/2" riser above or below the ground to a low flow, water efficient drip system. It may be used alone, operating pressure from 8-80 PSI. Unused outlets may be plugged so that a minimum of four of the outlets, to a maximum of twelve, are in use at once. The drip head has twelve individual outlets that can each be connected to 1/8" micro tubing (included) or 1/4" micro tubing using the included converter barbs. Additionally the kit includes 100' of 1/8" micro tubing, 12 converter barbs, 12 stakes, 8 caps and 8 bug plugs to close the end of the 1/8" micro tubing and to prevent bugs from entering the system.

  • PC12100 : 2 GPH per zone
  • PC14100 : 4 GPH per zone

  Updated:07/16/10
Retrofit Drip Head Kit, 6 GPH, PC, 4-outlet with 1/2" FPT

Retrofit Drip Head Kit, 6 GPH, PC, 4-outlet with 1/2" FPT

The 4-outlet drip head is designed to retrofit an existing 1/2" riser to a low flow, water efficient drip system without disturbing the sprinkler system flow rate. It is ideal for individual plants or plants that the sprinkler system cannot reach. The 4-outlet drip head has four PC outlets which can each be connected to 1/4" micro tubing, and covers up to four plants. The kit also contains 50' of 1/4" micro tubing and four 1/4" stakes.

  • A450

  Updated:07/16/10
Retrofit Drip Head, 6 GPH, PC, 4-outlet with 1/2" Female Pipe Thread

Retrofit Drip Head, 6 GPH, PC, 4-outlet with 1/2" Female Pipe Thread

Converts an existing 1/2" sprinkler riser to a 4-outlet, high flow, pressure compensating (PC) drip system.

The flow rate is 6 GPH per outlet at any pressure between 10 and 50 PSI. Extend 1/2" micro tubing from the head to the plants and secure the micro tubing with a 1/4" stake. The 4-outlet drip zone can be combined with 1/4" laser drilled soaker hose to a maximum length of 6' per zone.

  • A4 : locator no. 87

  Updated:07/16/10
Retrofit Drip Head, 0 - 20 GPH, Adjustable, 6-outlet with 1/2" Female Pipe Thread

Retrofit Drip Head, 0 - 20 GPH, Adjustable, 6-outlet with 1/2" Female Pipe Thread

The 6-outlet head can be used to convert an existing 1/2" sprinkler riser to a 6-outlet drip zone.

Each outlet may be adjusted by turning the knob under the drip head to increase or decrease the flow. Extend 1/4" micro tubing from the drip head to plants and secure the micro tubing with a 1/4" stake. It may be used with other drippers or with 1/4" laser drilled soaker hose.

  • AD6 : locator no. 86

  Updated:07/16/10
Retrofit Drip Head, 6 GPH, PC, 6-outlet with 1/2" Female Pipe Thread

Retrofit Drip Head, 6 GPH, PC, 6-outlet with 1/2" Female Pipe Thread

Converts an existing 1/2" sprinkler riser to a 6-outlet, high flow, pressure compensating (PC) drip system.

The flow rate is 6 GPH per outlet at any pressure between 10 and 50 PSI. Extend 1/2" micro tubing from the head to the plants and secure the micro tubing with a 1/4" stake. The 4-outlet drip zone can be combined with 1/4" laser drilled soaker hose to a maximum length of 6' per zone.

  • A6 : locator no. 89

  Updated:07/16/10
Conversion Elbow

Conversion Elbow

Attach to a 1/2" riser to adapt to 3/4" hose thread.

  • Q59 : locator no. 63

  Updated:07/16/10
PE Riser Assembly, 8" on 1/2" MPT

PE Riser Assembly, 8" on 1/2" MPT

Polyethylene riser assembly allows you to raise any micro sprayers with 10/32 thread above the ground. The riser assembly can be used to retrofit any 1/2" FPT outlet.

  • R73 : locator no. 84

  Updated:07/16/10
Riser Adapter, 1/2" FPT X 10/32 thread

Riser Adapter, 1/2" FPT X 10/32 thread

allows you to thread in a 10/32 threaded micro sprinkler or spray jets to a 1/2" riser.

  • R70 : locator no. 88

  Updated:07/16/10
Riser Adapter, 1/2" FPT X 1/2" MPT with 1/4" barb

Riser Adapter, 1/2" FPT X 1/2" MPT with 1/4" barb

Allows for the incorporation of a 1/4" micro tubing with drippers to an existing 1/2" sprinkler riser. Use with drippers, misters, or micro sprinklers.

  • Inlet 1/2" FNPT
  • Outlet with 1/2" MNPT
  • R67 : locator no. 90

  Updated:07/16/10
Adjustable Dripper with Full Circle on 1/2" FPT

Adjustable Dripper with Full Circle on 1/2" FPT

Adjustable flow from 0 to 10 GPH. When the cap is rotated the flow and the radius of the wetted area can be adjusted from a gentle stream patte, to drip, to off, allowing the changing of flow for each individual plant. Twisting the dial on the dripper toward the "+" or the "-" signs will allow you to increase or decrease the flow in a 360° patte.

  • AD5 : locator no. 85

  Updated:07/16/10

Loading...