Head Assembly
Using a drip zone components to start a drip system ensure a trouble free operation
Product Categories
Automatic Valve Assembly for Drip System
Everything you need to start a drip system in one package. This kit consists of a 3/4" electric valve, 155 mesh screen filter, preset 25 PSI pressure regulator and a 3/4" swivel adapter. Completely assembled, the DM075 electric valve assembly is ready to install with your drip irrigation system. It can be connected to a DIG 8006, 8004 or any other 24-volt AC controller via 16 to 18 gauge electric wire. DM075 can be installed below grade in a 12" irrigation box or above grade. The recommended flow rate is 8 to 9 GPM or 480 to 540 GPH.
- DM075 : locator no. 40
Valve Manifold Assembly, 2 zone 24 VAC 1"
DIG valve assemblies use our swivel fittings for quick assembly and disassembly of valve manifold.
No glue, Teflon tape or special tools are needed.
Use any brand name AC controller or our model 8004 or 8006 controllers
- P39-102
Valve Manifold Assembly, 3 zone 24 VAC 1"
DIG valve assemblies use our swivel fittings for quick assembly and disassembly of valve manifold.
No glue, Teflon tape or special tools are needed.
- P39-103
Valve Manifold Assembly, 4 zone 24 VAC 1"
DIG valve assemblies use our swivel fittings for quick assembly and disassembly of valve manifold.
No glue, Teflon tape or special tools are needed.
- P39-104
Back-flow Preventer, hose thread
Prevents dirt or fertilizer from re-entering the water system
- 3/4" FHT Inlet
- 3/4" MHT Outlet
- D45 : locator no. 10
Filter/Fertilizer Applicator with Back-flow Preventer
Apply fertilizer directly through your system, the DIG filter/fertilizer applicator must be used with the back-flow device included in the package.
It will keep incoming water clean, and can apply water-soluble fertilizer. It will accommodate up to four spoonfuls of any water-soluble fertilizer at one time.
The only maintenance required is to remove and rinse the screen with fresh water after each use to keep the filter/fertilizer applicator clean.
- A201B : locator no. 12
Screen Filter, 3/4" hose thread
3/4" FHT x 3/4" MHT, 155 mesh screen filter removes dirt and particles from the irrigation system and protects the small orifices of the drippers and micro sprinklers from clogging.
- 3/4" flow rate up to 900 GPH or 15 GPM
- Maximum Working Pressure: 150 PSI
- 155 mesh polyester screen (color green)
- D57A : locator no. 13
Screen Filter, 3/4" pipe thread
3/4" MNPT x 3/4" MNPT, 155 mesh screen filter removes dirt and particles from the irrigation system and protects the small orifices of the drippers and micro sprinklers from clogging.
- 3/4" flow rate up to 900 GPH or 15 GPM
- Maximum Working Pressure: 150 PSI
- 155 mesh polyester screen (color green)
- D55 : locator no. 6
Screen Filter, 1" pipe thread
1" MNPT x 1" MNPT, 155 mesh screen filter removes dirt and particles from the irrigation system and protects the small orifices of the drippers and micro sprinklers from clogging.
- 1" flow rate up to 1200 GPH or 20 GPM
- Maximum Working Pressure: 150 PSI
- 155 mesh polyester screen (color green)
- D56C : locator no. 3
Preset Pressure Regulator, 25psi hose thread
Reduces incoming water pressure to the ideal working pressure for a drip system.
- Maximum Inlet Pressure: 100 PSI
- Inlet 3/4" FHT (black) x Outlet 3/4" MHT - (black)
- D46 : locator no. 4
Preset Pressure Regulator, 25psi pipe thread
Reduces incoming water pressure to the ideal working pressure for a drip system.
- Maximum Inlet Pressure: 100 PSI
- Inlet 3/4" FNPT (grey) x Outlet 3/4" MNPT - (black)
- D46P : locator no. 5
Swivel Adapter, 3/4" hose thread to 3/4" pipe thread
Connects 3/4" FHT to 3/4" MNPT.
- 50007 : locator no. 7
Adjustable Pressure Regulator, 28psi - 60psi
Direct acting adjustable pressure regulator designed where accurate and reliable control of line pressure is needed.
Adjust by removing the red cap and dialing up "+" and down "-", to a maximum of 60 PSI and minimum of 28 PSI.
- Adjustable from 28 to 60 PSI.
- Maximum Incoming pressure 125 PSI
- 3/4" FNPT x 3/4" FNPT
- PRV075 : locator no. 8
Threaded Coupling, 3/4" pipe thread to 3/4" hose thread
Connects 3/4" MNPT to 3/4" MHT.
- Maximum working pressure 100 PSI
- D49 : locator no. 9