Hose end timers, Battery operated Controllers & AC Controllers
DIG Corporation offers a wide rang of 3/4" hose end timers, single, four and six station in-line and anti-siphon battery operated controllers and AC controllers.
Hose end timers, Battery operated Controllers & AC Controllers
9001EZ, 3/4" Hose end timer
The 9001EZ 3/4" hose end timer has a female hose thread inlet and a male hose thread outlet that can be connected to a outdoor faucet or to the end of a garden hose. The hose end timer use 1, 9-volt alkaline battery and it is simple to program using two dials and a programming button to set the time duration, the day of the week to water and the desire start time.
Features:
- Two selectors dials and one button to program:
- Watering duration from length of 2 to 45 minutes or from1 to a 9 hours length:
- Hourly or cyclical program from every 3 to 12 hours or from every 1, 2, 3, 4, 7 or 14 days:
- If set to every 3 hours, up to eight start times a day can be achieved:
- Weather resistant:
- Manual irrigation cycle via the controller by pushing the start button:
- Automatic and manual operation
- Use for drip or sprinkler systems
- 3-years warranty
Specifications:
- Flow Rate: Up to 5.2 GPM at 30 PSI (19.7 l/h at 2 BAR)
- Temperature Range: 38-130°F (3.33-54.45°C)
- Operating Pressure: 10-80 PSI (.7-5.6 BAR)
- Solenoid Mechanism: Durable Electric Motor
- Power Source: 9-Volt DC (1, 9-Volt Alkaline Battery) Not Included
- Battery Life: Up to 1 year
Updated:07/16/10
9001D Hose end timer with LCD display
The 9001D 3/4" hose end timer with LCD display is DIG bestseller hose end timer. The 9001D has a female hose thread inlet and a male hose thread outlet that can be connected to a outdoor faucet or to the end of a garden hose. The hose end timer use 1, 9-volt alkaline battery that can last for one year. The 9001D hose end timer is simple to program using six programming buttons. The left button is used only for a rain off or system shutoff, the button on the right is used for manual on/off and the four buttons in the middle are used to program this unit
Features:
- 3/4" FHT inlet and MHT outlet
- 6 buttons with large integrated liquid crystal display
- Easy to read AM/PM clock and program
- Watering durations from 1 minute to 11 hours and 59 minutes, in 1 minute increments
- 7 day calendar schedule
- Four start times per day
- Emergency backup program of 5 minutes every 24 hours if no buttons are pressed after battery installation
- Weather resistant
- Manual irrigation cycle via the hose end timer programming button
- Powered by one 9-volt alkaline battery
- Irrigation suspension override (rain mode)
- Low battery indicator
- Battery life up to 1 year
- Use for drip or sprinkler systems
- 3 year limited warranty
Specifications:
- Flow Rate: Up to 5.2 GPM at 30 PSI (19.7 l/h at 2 BAR)
- Temperature Range: 38-130°F (3.33-54.45°C)
- Operating Pressure: 10-80 PSI (.7-5.6 BAR)
- Solenoid Mechanism: Durable Electric Motor
- Power Source: 9-Volt DC (1, 9-Volt Alkaline Battery) Not Included
- Battery Life: Up to 1 year
Updated:07/16/10
Single station battery operated controller with 3/4" inline valve
Single Station battery operated controller with 3/4" FNPT in-line valve and hose adapters. The controller can be install to a PVC pipe using a male pipe thread or to a faucet/ hose bib using the hose to pipe adapters fittings (included)
Features:
- Six buttons with large integrated liquid crystal display* Easy to read AM/PM clock* Watering duration from one minute to eleven hours and 59 minutes in 1 minute increment:
- 7 days schedule calendar:
- Four start times per day on weekly schedule* Emergency backup program of 5 minutes every 24 hours if no buttons are pressed after battery installation:
- Weather resistant:
- Manual irrigation cycle via the controller:
- Irrigation suspension override (rain mode):
- Low battery indictor* Choice of hose thread to pipe thread fitting included:
- Controller clock can be detached 30" via coiled cable for easy program* 3 years warranty
Specifications:
- Operating Pressure: 10 to 120 PSI* Maximum flow rate: .1-28 GPM:
- Temperature range: 38 to 130 degree F (3-54 degree C)* Power source: one 9-volt alkaline batteries (not included)):
- Battery life: up to one year:
- low battery indicator
Updated:07/16/10
Single station battery operated controller on 3/4" Anti-Siphon valve
For residential and light commercial application
Features:
- Anti-Siphon Valve prevents irrigation water from reentering the water source Especially important when automatically applying fertilizer through a filter
- Six buttons with large integrated liquid crystal display
- Easy to read AM/PM clock
- Watering duration from one minute to eleven hours and 59 minutes in 1 minute increment
- 7 days schedule calendar
- Four start times per day on weekly schedule
- Emergency backup program of 5 minutes every 24 hours if no buttons are pressed after battery installation
:
- Weather resistant
- Manual irrigation cycle via the controller
- Irrigation suspension override (rain mode)
- Low battery indictor
- Controller clock can be detached 30" via coiled cable for easy program
- 3 years warranty
Specifications:
- Operating Pressure: 25 to 125 PSI
- Maximum flow rate: 10 GPM
- Power source: one 9-volt alkaline batteries (not included))
- Battery life: up to one year
- low battery indicator
Updated:07/16/10
Single Station battery operated controller with actuator to convert most 3/4" and 1" brass or plastic manual anti-siphon valve
This controller featured a large LCD display with six buttons to program. The controller can be install on any manual anti-siphon valve only. Anti-siphon valve in picture not included
Features:
- Anti-Siphon Valve prevents irrigation water from reentering the water source Especially important when automatically applying fertilizer through a filter* Six buttons with large integrated liquid crystal display* Easy to read AM/PM clock* Watering duration from one minute to eleven hours and 59 minutes in 1 minute increment:
- 7 days schedule calendar:
- Four start times per day on weekly schedule* Emergency backup program of 5 minutes every 24 hours if no buttons are pressed after battery installation:
- Weather resistant:
- Manual irrigation cycle via the controller:
- Irrigation suspension override (rain mode):
- Low battery indictor:
Slow opining, slow closing for smooth operation* Controller clock can be detached 30" via coiled cable for easy program* 3 years warranty
Specifications:
Operating Pressure: 25 to 125 PSI
- Maximum flow rate: 10 GPM
- Manual flow control can adjust to zero flow* Dry latching 2 wires solenoid:
- Power source: one 9-volt alkaline batteries (not included)):
- Battery life: up to one year:
- low battery indicator
Updated:09/16/11
6 Station Independent Programmable Irrigation Controller
Using sleek contemporary design, the 8006 indoor mounted controller offers a true programming flexibility for each valve. The controller is simple to program and allow for each valve to be programmed independently of the others, from 1 minute to 12 hours in one minute increments.
Features:
- Four buttons with an integrated liquid crystal display (LCD)
- Independent program for each valve
- Easy to read AM/PM clock
- Watering Duration: from 1 minute to 11 hours and 59 minutes in 1 minute increments
- 7 day programming schedule or intervals from 1 to 30 days
- Four start times per day on weekly schedule
- Automatic short detector isolates the faulty valve and continues the irrigation cycle
- Start time stacking prevents hydraulic overload
- Master valve remote pump start circuit
- Default program: after prolonged power interruption each station will operate for 10 minutes
- Can be programmed under backup battery power without AC power connection
- Water budget from 95% to +95% in 5% increments
- "Rain Off" mode
- Rain delay up to 30 days with auto restart
- Three modes: automatic, semi-automatic and manua
- Irrigation suspension override (rain mode)
- Internal manual bleed
- Can operate two valves at the same time
- Waiting mode for third and fourth valves
- Manual irrigation cycle via the controller
- Battery backup retain program memory during a power outage
- 3 years warranty
Specifications:
- Input required: 110 VAC, 60 Hz 28 VA input (UL listed plug in transformer included)
- Output: 24 VAC 0.83 mA
- Outputs: 24 VAC, 0.27A
- Maximum output: 0.83A
- Program backup: 9-volt battery (not included)
- Including a terminal for sensor connection
Updated:07/16/10
