The vegetable garden kit includes all the fittings and accessories needed to install various lengths of drip line in a vegetable garden planter starting from a hose faucet. The ML50 kit can be used to water all types of vegetable plants in an 8" to 12" spacing with a flow rate of up to 220 GPH using the 1/2" drip tubing as the main line.

The most important practice for a healthy and productive vegetable garden is the use of an appropriate irrigation system. During years of normal rainfall, rains usually wet the soil and provide a good supply of deep soil moisture. What happens later will depend upon the efficiency of your irrigation system. Adequate soil moisture is important for seed germination, uniform growth, and productivity. Correct use of a drip irrigation system should keep vegetable plants actively growing in dry periods yet cause no problem when rain occurs following irrigation. The system, when properly operated, keeps soil at the base of the plant (root zone area) moist. This may require operating the system for short periods two to four times a week during dry weather in order to prevent the soil from ever becoming completely dry.

One of the most important features of a drip irrigation system is the creation of a totally new and more favorable root zone environment within the planting. Drip irrigation sustains this environment by using low flow rates to maintain constant soil moisture levels. This encourages better growth and disease resistance by reducing plant stress.

Note: To automate this kit use our model 9001D hose end timer.

All parts included
• Ease of installation - the ML50 kit can be installed without special tools or glue, and with limited knowledge, making the installation a very simple process.
• Reduced pest problems and weed growth - watering only the plant roots using drip irrigation cuts down on water-borne pests and fungal diseases that spread by water movement, as well as the germination of weeds in the areas between the plants.
• Water efficiency - by applying water only where and when it is needed, with less runoff and less evaporation from leaves and soil, the uniform application of water from your drip irrigation systems can achieve high water savings.

Specifications:
• Two outlets per each drip emitter helps prevent clogging
• Flow rate: 35 GPH per 50'
• Drip line emitter spacing: every 9"
• Dripper flow rates: .52 GPH @ 15 PSI and .65 GPH @ 25 PSI
• Maximum incoming operating pressure: 25 PSI
• Maximum length run of 1/4" drip line: 30'
• Drip line operating pressure: 10 to 25 PSI
• 1/4" drip dimensions:.170 ID x .250 OD+-5%

Kit includes:
• 1 3/4" FHT x 3/4" MHT backflow preventer
• 1 3/4" FHT, 25 PSI pressure regulator
• 1 1/2" .700 OD compression 3/4" FHT swivel adapter with screen
• 4 figure "8" hose ends for 1/2" drip tubing
• 3 1/2" .700 OD compression tees
• 8 1/2" .700 OD compression elbows
• 1 1/2" .700 OD compression coupling
• 1 hole punch
• 4 6" heavy duty plastic holder stakes for 1/2" drip tubing
• 10 6" heavy duty plastic holder stakes for 1/4" drip line
• 15 1/4" barbed connectors
• 1 goof plugs, strip of 10
• 1 50' length of 1/2" drip tubing with .700 OD
• 1 50' length of 1/4" drip line with 9" emitter spacing and .52 GPH per drip emitter

• Simple to install
• Color coded outlet barb may be removed and replaced to change flow rates
• Used with 1/4" micro tubing, 1/4" soaker line or 1/4" drip line
• Built-in screen filter and large water passage to prevent clogging
• Flow rate: 12 GPH
• Pressure compensating range: 10-60 PSI
• Color code: red
• 1/2" FNPT inlet
• Constructed of UV-resistant plastic material

• Uniform flow rate
• Constructed of high-quality material to ensure stability and long life
• Flow rate: .5 GPH (gallons per hour) (4 l/h) (WL0510B, WL0525B) Color code: red
• Flow rate: 1 GPH (gallons per hour) (4 l/h) (WL125B, WL110B) Color code: black
• Suggested operating pressure: 25 PSI
• Available with 1/4" barbed inlet and outlet

• Simple to install
• Used with 1/4" micro tubing and 1/2" drip tubing using 1/4" barbed fittings
• Flow rate: 17 GPH per 50’ (.4 GPH per foot)
• Suggested operating pressure: 25 PSI
• Constructed of UV-resistant rubber

• Can be taken apart for easy cleaning
• Click adjustment from 0 flow to full flow - perfect as the plant grows and needs more water
• UV-stabilized material for long life
• Suggested operating pressure: 25 PSI
• Available on 1/4" barb
• Five streams for 180° coverage

• Rugged material using high impact plastic
• Available in packs of 10